Fabtech
Fabtech Performance Twin Tube Shock Absorber - Rear
Fabtech Performance Twin Tube Shock Absorber - Rear
Part number: 1FY2F
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Performance Twin Tube Shock Absorber from Fabtech (rear). Highlights include twin Tube Hydraulic Construction and 9/16? Hardened Chrome Piston Rod. Shocks and struts control how the springs move, keeping the tires on the road over bumps. The fitment section lists 13 applications.
Key features
- Twin Tube Hydraulic Construction
- 9/16? Hardened Chrome Piston Rod
- 1 3/8? OD Piston
- Closed Cell Foam insert
- High Flow 9 Stage Valving
- Rear
Specifications
- Brand: Fabtech
- Part type: Shock
- Position: Rear
Fitment
- 1987 - 1995 Jeep Wrangler Base
- 1988 - 1992 Jeep Wrangler Islander
- 1987 - 1990 Jeep Wrangler Laredo
- 1991 - 1994 Jeep Wrangler Renegade
- 1995 Jeep Wrangler Rio Grande
- 1988 - 1994 Jeep Wrangler S
- 1988 - 1995 Jeep Wrangler Sahara
- 1994 - 1995 Jeep Wrangler SE
- 1987 - 1988 Jeep Wrangler Sport
- 2006 Toyota Tacoma Base Prerunner
- 2005 - 2013 Toyota Tacoma Base, X-Runner, Pre Runner
- 2006 - 2009 Toyota Tacoma SR5 Prerunner, TRD Sport Prerunner
- 2010 - 2013 Toyota Tacoma TRD Sport
What it does
Shocks and struts are normally replaced in pairs on the same axle. Worn suspension and steering parts show up as clunks, wandering, uneven tire wear and a vague feel; fresh parts restore control, and performance parts sharpen it.
Installation & tips
- Replace shocks in pairs on the same axle, and get an alignment after strut work.
- Strut mounts: Often worn at the same time.
- Alignment: Needed after strut replacement.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the rear position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
13 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Check the position: this part is listed as rear.
- Measure the part you are replacing and compare it with the specifications above.
- Plan for a wheel alignment after fitting if the job changes the suspension or steering geometry.
Before you order: fitment and what to plan
Shocks and struts control how the springs move, keeping the tires on the road over bumps.
Fitment notes
- Specs, lead time and warranty come from Fabtech and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentPlan the whole job
- Strut mounts. Often worn at the same time.
- Alignment. Needed after strut replacement.
More for your car: Suspension & steering · Suspension & steering
Questions about shocks or struts
Will this fit my car?
Should I replace them in pairs?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.