Edelbrock
Edelbrock Performer Small-Block Ford 5.0/ 5.8 Cylinder Head 2.02"
Edelbrock Performer Small-Block Ford 5.0/ 5.8 Cylinder Head 2.02"
Part number: 02KD0
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Ford 5.0/ 5.8Fitment notes & questions
Performer Small-Block by Edelbrock, made to fit Ford vehicles as listed below. Key specs: deck height 8.2 in, deck thickness 0.625 in and material Aluminum. The cylinder head holds the valves and forms the top of the combustion chamber. The fitment section lists 117 applications for Ford vehicles.
Key features
- EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC FLAT TAPPET CAMSHAFT APPLICATIONS
- These heads accept 1982-95 5.0L V8 pedestal mount rocker arms and valvetrain
- 289-302 V8's require head bolt bushing #9680 and either head bolt kit #8552 (7/16") or stock bolts
- Match with Edelbrock head gasket sets
- Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat
Specifications
- Brand: Edelbrock
- Part type: Cylinder head
- Combustion Chamber Volume: 60.0 cu.in
- Deck Height: 8.2 in
- Deck Thickness: 0.625 in
- Intake Runner Volume: 170.0 cu.in
- Material: Aluminum
- Push Rod Diameter: 0.312 in
- Valve Angle: 20 deg
Fitment
- 1985 - 1995 Ford Bronco Eddie Bauer
- 1990 - 1995 Ford Bronco XL
- 1982 - 1983 Ford Bronco XLS
- 1984 - 1995 Ford Bronco XLT
- 1982 - 1993 Ford Bronco XLT Lariat, Custom
- 1992 Ford Bronco XLT Nite
- 1995 Ford Bronco XLT Sport
- 1987 - 1991 Ford Country Squire LX, Base
- 1982 Ford E-100 Econoline Base, Chateau
- 1982 - 1983 Ford E-100 Econoline Custom
- 1983 Ford E-100 Econoline XL
- 1982 Ford E-100 Econoline Club Wagon Chateau, Base
- 1982 - 1983 Ford E-100 Econoline Club Wagon Custom
- 1983 Ford E-100 Econoline Club Wagon XL
- 1982 - 1995 Ford E-150 Econoline Base
- 1982 Ford E-150 Econoline Chateau
- 1982 - 1991 Ford E-150 Econoline Custom
- 1983 - 1995 Ford E-150 Econoline XL
- 1982 - 1986 Ford E-150 Econoline Club Wagon Base
- 1982 - 1995 Ford E-150 Econoline Club Wagon Chateau, Custom
- 1983 - 1991 Ford E-150 Econoline Club Wagon XL
- 1984 - 1995 Ford E-150 Econoline Club Wagon XLT
- 1982 - 1995 Ford E-250 Econoline Base
- 1982 Ford E-250 Econoline Chateau
- 1982 - 1991 Ford E-250 Econoline Custom
- 1983 - 1995 Ford E-250 Econoline XL
- 1982 - 1986 Ford E-250 Econoline Club Wagon Base
- 1982 Ford E-250 Econoline Club Wagon Chateau
- 1982 - 1991 Ford E-250 Econoline Club Wagon Custom
- 1983 - 1991 Ford E-250 Econoline Club Wagon XL
- 1984 - 1991 Ford E-250 Econoline Club Wagon XLT
- 1982 - 1995 Ford E-350 Econoline Base
- 1982 Ford E-350 Econoline Chateau
- 1982 - 1991 Ford E-350 Econoline Custom
- 1983 - 1995 Ford E-350 Econoline XL
- 1982 - 1986 Ford E-350 Econoline Club Wagon Base
- 1982 - 1995 Ford E-350 Econoline Club Wagon Chateau, Custom
- 1992 - 1993 Ford E-350 Econoline Club Wagon Custom HD
- 1983 - 1991 Ford E-350 Econoline Club Wagon XL
- 1994 - 1995 Ford E-350 Econoline Club Wagon XL HD
- …and 77 more
Check your year, model, engine and trim against this list before you order.
What it does
Replacing a head is a big job, so plan all the gaskets, bolts and fluids up front. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Use new head bolts if your engine calls for torque-to-yield bolts, and torque in the correct sequence.
- Head gasket: Always new with a head.
- Coolant and oil: Refill both after the job.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the performer Small-Block made of?
The listing gives the material as aluminum.
What size is it?
Deck Height: 8.2 in; Deck Thickness: 0.625 in; Push Rod Diameter: 0.312 in.
How many vehicles is it listed for?
117 applications are listed in the fitment section above.
Before you order
- Confirm your year, make, model and trim match the fitment listed above.

Before you order: Ford 5.0/ 5.8 cylinder head fitment
The cylinder head holds the valves and forms the top of the combustion chamber.
Fitment notes
- Listed for: Ford 5.0/ 5.8.
- Specs, lead time and warranty come from Edelbrock and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.
Ask about fitmentPlan the whole job
- Head gasket. Always new with a head.
- Coolant and oil. Refill both after the job.
More for your car: Engine · Ford Parts · Engine
Questions about Ford 5.0/ 5.8 cylinder head
Will this fit my Ford 5.0/ 5.8?
Is the head assembled or bare?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.