Edelbrock
Edelbrock Performer D-port Complete 72cc
Edelbrock Performer D-port Complete 72cc
Part number: 0E3FY
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Edelbrock Performer D-port Complete 72cc. Key specs: deck thickness 5/8", rocker stud diameter 7/16" and pushrod diameter 5/16" (width of slot in guide plate). A cracked or warped head usually shows up as overheating or coolant loss.
Key features
- Combustion Chamber: 72cc
- 350 c.i.d. engines may require notching the block for valve clearance
- Three head bolt bosses are raised higher than the standard D-port heights and will require head bolt kit #8561 to install these heads
- Deck thickness: 5/8"
- Rocker stud diameter: 7/16"
- Pushrod diameter: 5/16" (width of slot in guide plate)
- Guide Plates Included
Specifications
- Brand: Edelbrock
- Part type: Cylinder head
- Combustion Chamber: 72cc
- Deck thickness: 5/8"
- Rocker stud diameter: 7/16"
- Pushrod diameter: 5/16" (width of slot in guide plate)
- Combustion Chamber Volume: 72.0 cu.in
- Deck Height: 10.250 in
- Exhaust Valve Diameter: 1.660 in
- Intake Runner Volume: 204.0 cu.in
- Intake Valve Diameter: 2.110 in
- Material: Aluminum
- Push Rod Diameter: 0.312 in
- Valve Angle: 14 deg
- Valve Spring Diameter: 1.460 in
- Valve Spring Maximum Lift: 0.575 in
- Valve Stem Diameter: 0.341 in
Fitment
Compatible with: Universal
What it does
The cylinder head holds the valves and forms the top of the combustion chamber. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Use new head bolts if your engine calls for torque-to-yield bolts, and torque in the correct sequence.
- Head gasket: Always new with a head.
- Coolant and oil: Refill both after the job.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the cylinder head made of?
The listing gives the material as aluminum.
What size is it?
Deck thickness: 5/8"; Rocker stud diameter: 7/16"; Pushrod diameter: 5/16" (width of slot in guide plate).
Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.
Before you order
- Measure the part you are replacing and compare it with the specifications above.

Edelbrock cylinder head: what to know
A cracked or warped head usually shows up as overheating or coolant loss.
Fitment notes
- Specs, lead time and warranty come from Edelbrock and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentWhat else to plan for
- Head gasket. Always new with a head.
- Coolant and oil. Refill both after the job.
More for your car: Engine
Questions about cylinder head
Will this fit my car?
Is the head assembled or bare?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.