Edelbrock
Edelbrock Cylinder Head, BB Ford, Performer 460, 95CC, for Hydraulic Roller Cams
Edelbrock Cylinder Head, BB Ford, Performer 460, 95CC, for Hydraulic Roller Cams
Part number: 0E30N
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Hydraulic Roller CamsFitment notes & questions
Edelbrock Cylinder Head, BB for Ford vehicles. Key specs: deck height 10.322 in, deck thickness 0.625 in and exhaust valve diameter 1.760 in. Replacing a head is a big job, so plan all the gaskets, bolts and fluids up front. The fitment section lists 95 applications for Ford vehicles.
Key features
- Application: Universal
- GTIN: 00085347606658
- Combustion Chamber Volume: 95.0 cu.in
- Deck Height: 10.322 in
- Deck Thickness: 0.625 in
- Exhaust Valve Diameter: 1.760 in
- Guide Plates Included: Yes
- Intake Runner Volume: 292.0 cu.in
Specifications
- Brand: Edelbrock
- Part type: Cylinder head
- Combustion Chamber Volume: 95.0 cu.in
- Deck Height: 10.322 in
- Deck Thickness: 0.625 in
- Exhaust Valve Diameter: 1.760 in
- Intake Runner Volume: 292.0 cu.in
- Intake Valve Diameter: 2.190 in
- Material: Aluminum
- Push Rod Diameter: 0.375 in
- Rocker Stud Diameter: 0.437 in
- Valve Spring Diameter: 1.550 in
- Valve Spring Maximum Lift: 0.700 in
- Valve Stem Diameter: 0.341 in
- Pushrod diameter: 3/8" (width of slot in guide plate)
Fitment
- 1969 - 1974 Ford Country Sedan Base
- 1969 - 1974 Ford Country Squire Base
- 1969 - 1972 Ford Custom Base
- 1969 - 1976 Ford Custom 500 Base
- 1975 - 1976 Ford Custom 500 Ranch Wagon
- 1978 Ford E-100 Econoline Chateau, Base, Northland, Custom
- 1975 - 1980 Ford E-250 Econoline Base, Chateau, Custom
- 1975 - 1978 Ford E-250 Econoline Northland
- 1975 - 1986 Ford E-250 Econoline Club Wagon Base
- 1975 - 1982 Ford E-250 Econoline Club Wagon Chateau
- 1975 - 1987 Ford E-250 Econoline Club Wagon Custom
- 1975 - 1978 Ford E-250 Econoline Club Wagon Northland
- 1983 - 1987 Ford E-250 Econoline Club Wagon XL
- 1984 - 1987 Ford E-250 Econoline Club Wagon XLT
- 1975 - 1986 Ford E-350 Econoline Base
- 1975 - 1982 Ford E-350 Econoline Chateau
- 1975 - 1987 Ford E-350 Econoline Custom
- 1975 - 1978 Ford E-350 Econoline Northland
- 1983 - 1987 Ford E-350 Econoline XL
- 1977 - 1986 Ford E-350 Econoline Club Wagon Base
- 1977 - 1982 Ford E-350 Econoline Club Wagon Chateau
- 1977 - 1987 Ford E-350 Econoline Club Wagon Custom
- 1977 - 1978 Ford E-350 Econoline Club Wagon Northland
- 1983 - 1987 Ford E-350 Econoline Club Wagon XL
- 1984 - 1987 Ford E-350 Econoline Club Wagon XLT
- 1975 - 1976 Ford Elite Base
- 1973 - 1974 Ford F-100 Base
- 1976 - 1978 Ford F-150 Base
- 1975 - 1978 Ford F-150 Northland
- 1978 - 1979 Ford F-150 Ranger Lariat
- 1975 - 1979 Ford F-150 Ranger XLT, Ranger, Custom
- 1977 Ford F-150 XLT
- 1973 - 1986 Ford F-250 Base
- 1975 - 1987 Ford F-250 Custom
- 1975 - 1978 Ford F-250 Northland
- 1978 - 1979 Ford F-250 Ranger Lariat
- 1975 - 1979 Ford F-250 Ranger, Ranger XLT
- 1983 - 1987 Ford F-250 XL
- 1983 Ford F-250 XLS
- 1977 - 1984 Ford F-250 XLT
- …and 55 more
Check your year, model, engine and trim against this list before you order.
What it does
A cracked or warped head usually shows up as overheating or coolant loss. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Use new head bolts if your engine calls for torque-to-yield bolts, and torque in the correct sequence.
- Head gasket: Always new with a head.
- Coolant and oil: Refill both after the job.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the cylinder head made of?
The listing gives the material as aluminum.
What size is it?
Deck Height: 10.322 in; Deck Thickness: 0.625 in; Exhaust Valve Diameter: 1.760 in.
How many vehicles is it listed for?
95 applications are listed in the fitment section above.
Before you order
- Confirm your year, make, model and trim match the fitment listed above.

About this cylinder head for the Hydraulic Roller Cams
Replacing a head is a big job, so plan all the gaskets, bolts and fluids up front.
Fitment notes
- Listed for: Hydraulic Roller Cams.
- Specs, lead time and warranty come from Edelbrock and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.
Ask about fitmentParts that usually go with it
- Head gasket. Always new with a head.
- Coolant and oil. Refill both after the job.
More for your car: Engine · Ford Parts · Engine
Questions about Hydraulic Roller Cams cylinder head
Will this fit my Hydraulic Roller Cams?
Is the head assembled or bare?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.