Edelbrock
Edelbrock Coolant Temperature Sensor for Pro-Flo and E-Street Systems
Edelbrock Coolant Temperature Sensor for Pro-Flo and E-Street Systems
Part number: 052D5
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Pro-Flo and E-Street SystemsFitment notes & questions
Coolant Temperature Sensor by Edelbrock. Key specs: thread diameter 0.5 in and length 2.1 in. Sensors tell the engine computer what is happening so it can adjust fuel, timing and gauges.
Key features
- Thread Diameter: 0.5 in
- Terminal Gender: Male
- Connector Gender: Female
- Terminal Type: Pin
- Connector Shape: Oval
- Terminal Quantity: 2
- Application: Universal
- Installation Notes: Proper installation is the responsibility of the installer. Improper installation may result in poor performance and engine or vehicle damage
Specifications
- Brand: Edelbrock
- Part type: Sensor
- Thread Diameter: 0.5 in
- Terminal Gender: Male
- Connector Gender: Female
- Terminal Type: Pin
- Connector Shape: Oval
- Terminal Quantity: 2
- Length: 2.1 in
Fitment
This listing does not name specific vehicles. Match the part number and the specifications with the part you are replacing.
What it does
Reading the trouble code first points you to the right sensor. Electrical faults often show up as warning lights, rough running or no-start problems, and the right replacement part clears the cause rather than the symptom.
Installation & tips
- Read the code, check the wiring and connector, and clear codes after the new sensor is in.
- Connector and wiring: Corroded connectors mimic a bad sensor.
- Disconnect the battery before you unplug or splice any wiring, and test everything works before you refit trim panels.
FAQ
What size is it?
Thread Diameter: 0.5 in; Length: 2.1 in.
Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.
What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.
Before you order
- Measure the part you are replacing and compare it with the specifications above.

About this sensor for the Pro-Flo and E-Street Systems
Reading the trouble code first points you to the right sensor.
Fitment notes
- Listed for: Pro-Flo and E-Street Systems.
- Specs, lead time and warranty come from Edelbrock and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.
Ask about fitmentParts that usually go with it
- Connector and wiring. Corroded connectors mimic a bad sensor.
More for your car: Batteries & electrical · Batteries & electrical
Questions about Pro-Flo and E-Street Systems sensor
Will this fit my Pro-Flo and E-Street Systems?
Will a new sensor clear my check-engine light?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.