Eagle Honda D16 / ZC Engine Connecting Rods (Set of 4) CRS5394H3D
Eagle Honda D16 / ZC Engine Connecting Rods (Set of 4) CRS5394H3D
Part number: 1VCGR
Regular price
$389.68 USD
Regular price
Sale price
$389.68 USD
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Honda D16Fitment notes & questions
Eagle Honda D16 / ZC Engine Connecting Rods CRS5394H3D for Eagle and Honda. Worn rings show up as oil burning, blow-by and low compression.
Quick facts
- Part type: Piston
- Listed for: Eagle and Honda
- Sold as: Set of 4
Listed fitment
- 1994 - 2001 Acura Integra LS, GS-R
- 1994 - 1998 Acura Integra RS
- 1995 - 1996 Acura Integra Special Edition
- 1997 - 2001 Acura Integra Type R, GS
- 1989 - 2000 Honda Civic CX, Si
- 1990 - 2000 Honda Civic EX
- 1997 - 2000 Honda Civic EX-R
- 1999 - 2000 Honda Civic EX-R SIR
- 1998 - 2000 Honda Civic GX
- 1996 - 2000 Honda Civic HX
- 1988 - 2000 Honda Civic LX, DX
- 1988 - 1991 Honda Civic RT 4WD, Base
- 1988 Honda Civic SE
- 1999 Honda Civic Value Package
- 1992 - 1995 Honda Civic VX
- 1988 - 1989 Honda Civic Wagovan
- 1993 - 1997 Honda Civic del Sol S, Si
- 1994 - 1997 Honda Civic del Sol VTEC
- 1989 - 1991 Honda CRX Base
- 1988 Honda CRX DX
- 1988 - 1991 Honda CRX HF, Si
Tip: Check ring end gaps in the bore before installation and stagger the gaps.
About this piston for the Honda D16
Piston and ring size depends on the bore, so match them to your block after it is measured.
Fitment notes
- Listed for: Honda D16.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.
Ask about fitmentParts that usually go with it
- Bearings. Rod and main bearings are usually replaced at the same time.
- Gasket set. The engine comes apart for this job.
More for your car: Honda Parts · All Pistons · Engine
Questions about Honda D16 pistons
Will this fit my Honda D16?
It is listed for the Honda D16. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
Standard or oversize?
Standard fits an unmachined bore. Oversize is for a bored cylinder.
Where do specs and warranty details come from?
From the manufacturer. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.
Ask a question
More parts for this car