Eagle Ford 302 H-Beam Connecting Rods (Set of 8) CRS5400C3D

Eagle Connecting Rods for the Ford 302 H-Beam. Piston and ring size depends on the bore, so match them to your block after it is measured.

Key features

• Set of 8

Specifications

• Part type: Piston

Fitment for the Ford 302 H-Beam

Listed for the Ford 302 H-Beam. Check your year, model and trim against the title before you order.

What it does

Worn rings show up as oil burning, blow-by and low compression. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.

Installation & tips

• Check ring end gaps in the bore before installation and stagger the gaps.
• Bearings: Rod and main bearings are usually replaced at the same time.
• Gasket set: The engine comes apart for this job.
• Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.

FAQ

Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.

What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.

Before you order

• Confirm your year, make, model and trim match the fitment listed above (Ford 302 H-Beam).