Digital Engine Tach Hour Meter Tachometer Gauge Inductive Display | For Motorcycle Marine Car Boat

Gauge. Key specs: material ABS, sensor wire length 170 cm, 66.9 in and operating temperature 30C to 85C. Aftermarket gauges are a common add-on for modified engines where the factory cluster shows too little.

Key features

• ABS Construction — The meter is made of ABS
• Wide Temperature Range — The meter is rated for operating temperatures from -30C to 85C
• Inductive Clamp-On Pickup — The sensor wire wraps around a spark plug lead, with no direct electrical connection needed
• Replaceable CR2450 Cell — It is battery powered with a replaceable CR2450 cell, so it can be placed flexibly
• Use it on a motorcycle, boat, ATV, generator, or lawn mower to log RPM and run hours for routine service tasks such as oil changes and spark plug replacements
• Use it only on spark ignition engines, since it does not work on diesel engines that use compression ignition
• Mount it in a dry location or use a protective cover, because it is not waterproof
• Keep the replaceable CR2450 coin cell in the meter and replace it when the display needs power

Specifications

• Part type: Gauge
• Material: ABS
• Dimensions: 5 x 4.5 x 2 cm / 1.97 x 1.8 x 0.8 in
• Sensor wire length: 170 cm, 66.9 in
• Reading: 9999.9 hours / 99999 RPM
• Resolution: 1 minute or 10 RPM, quartz controlled
• Operating temperature: 30C to 85C
• Power: 1 x CR2450 battery
• LCD size: 42 × 12 mm (1.65 × 0.47 in)

Options

• Color: battery replaceable, battery replaceable 1, not replaceable, not replaceable 1

Fitment

This listing does not name specific vehicles. Match the part number and the specifications with the part you are replacing.

What it does

Gauges show what the engine is doing, from oil pressure to boost and temperature. Interior parts are what you touch every drive, so replacing worn or broken pieces makes the car nicer to use, and upgrades personalize the cabin.

Installation & tips

• Check that the gauge comes with the sender you need, or order it separately.
• Sender: Electrical gauges need a matching sender.
• Gauge pod: A pod or cup mounts it neatly.
• Use a service manual for your vehicle for torque specs and procedures, and keep the old part until the new one is fitted.

FAQ

What is the gauge made of?
The listing gives the material as ABS.

What size is it?
Dimensions: 5 x 4.5 x 2 cm / 1.97 x 1.8 x 0.8 in; Sensor wire length: 170 cm, 66.9 in; LCD size: 42 × 12 mm (1.65 × 0.47 in).

Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.

Before you order

• Measure the part you are replacing and compare it with the specifications above.