DBA 14-18 Mazda 3 2.0L Front Street Slotted Rotor DBA2565S
DBA 14-18 Mazda 3 2.0L Front Street Slotted Rotor DBA2565S
Part number: 9EJOP
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Mazda 3 2.0LFitment notes & questions
Front Street Slotted Rotor from DBA, listed for the 2014–2018 Mazda 3 with the 2.0L engine. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set.
Key features
- Street Series T2 rotor provides all the benefits of DBA?s Street Series direct replacement rotors with the added benefit of the introduction of DBA?s patented T2 slot design
- Front position
Specifications
- Brand: DBA
- Part type: Brake part
- Position: Front
- Engine: 2.0L
Fitment for the 2014–2018 Mazda 3
Listed for the 2014–2018 Mazda 3 with the 2.0L engine, front position. Check your year, model and trim against the title before you order.
What it does
Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which engine is it for?
It is listed for the 2.0L engine in the 2014–2018 Mazda 3. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (2014–2018 Mazda 3 2.0L).
- Check the position: this part is listed as front.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
Brake part for the Mazda 3 2.0L: what to know
Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention.
Fitment notes
- Listed for: Mazda 3 2.0L.
- Model years: 14-18. If your year sits at the edge of the range, check the details above.
- Engine: match the engine size and code to your vehicle; the same model often came with several engines.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentWhat else to plan for
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Rotors · Mazda Parts · Brakes
Questions about Mazda 3 2.0L brake part
Will this fit my Mazda 3 2.0L?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.