DBA 05-11 Audi A6 Quattro 4.2L Front En-Shield Standard Rotor DBA3156E
DBA 05-11 Audi A6 Quattro 4.2L Front En-Shield Standard Rotor DBA3156E
Part number: 9EJYI
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Audi A6 QuattroAWDFitment notes & questions
Front En-Shield Standard Rotor by DBA, made to fit the 2005–2011 Audi A6 Quattro with the 4.2L engine as listed below. Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention.
Key features
- Front position
Specifications
- Brand: DBA
- Part type: Brake part
- Position: Front
- Engine: 4.2L
Fitment for the 2005–2011 Audi A6 Quattro
Listed for the 2005–2011 Audi A6 Quattro with the 4.2L engine, front position. Check your year, model and trim against the title before you order.
What it does
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which engine is it for?
It is listed for the 4.2L engine in the 2005–2011 Audi A6 Quattro. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (2005–2011 Audi A6 Quattro 4.2L).
- Check the position: this part is listed as front.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
About this brake part for the Audi A6 Quattro
Brake parts are usually replaced per axle, left and right together, so the car stops straight.
Fitment notes
- Listed for: Audi A6 Quattro.
- Model years: 05-11. If your year sits at the edge of the range, check the details above.
- Drivetrain: AWD. AWD and 4WD versions often use different parts from 2WD versions of the same car.
- Engine: the same car can take different parts for each engine option, so check yours.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentParts that usually go with it
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Audi Parts · Brakes
Questions about Audi A6 Quattro brake part
Will this fit my Audi A6 Quattro?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.