Coolant Hose - Water Pump to Oil Cooler [Late Vanagon]
Coolant Hose - Water Pump to Oil Cooler [Late Vanagon]
Part number: 025-121-058J
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Coolant Hose. Check the part number and details below against what you are replacing. Pumps wear at the bearing and seal. A leak from the weep hole or a growling noise usually means it is time.
Quick facts
- Part type: Water pump
Listed fitment
- 86-91 Vanagon
Tip: Flush the old coolant and refill with the type your engine specifies, then bleed air out of the system.
![Coolant Hose - Water Pump to Oil Cooler [Late Vanagon]](http://partotter.com/cdn/shop/files/full_df68e1da04f30f1496c8befb71505ccb.jpg?v=1793141617&width=1445)
Water pump: what to know
Pumps wear at the bearing and seal. A leak from the weep hole or a growling noise usually means it is time.
Fitment notes
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.
Ask about fitmentWhat else to plan for
- Thermostat. Cheap to replace while the system is drained.
- Coolant. Refill with the correct type.
- Timing belt. If the belt drives the pump, do both together.
More for your car: Water Pumps · All Water Pumps · Cooling & heating
Questions about water pump
Will this fit my car?
What are signs of a failing water pump?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.