COMP Cams
Comp Cams HI-TECH PUSHROD 3/8 7.950
Comp Cams HI-TECH PUSHROD 3/8 7.950
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
The pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. Pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the parts in the valve train, as well as the rpm at which the engine will be run. Today's all-out race engines demand the highest quality components at every step, and COMP Cams® Hi-TechT Pushrods fill that requirement.
Hi-TechT Pushrods feature a one-piece design from .080" wall, seamless chromemoly tubing that ensures the ultimate in strength and durability. Ends are precision formed, yielding added thickness and strength in the critical tip area, while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated for maximum strength to ensure compatibility with guide plates. They are OD ground for consistency and black-oxide finished with length and part number laser etched on the OD for ease of identification.
One-piece construction from .080" wall, seamless chromemoly
Heat-treated for extended durability & guide plate compatibility
Precision formed & reinforced ends
Black-oxide finished with laser etched part number & length
Ideal for serious street performance & race applications
Before you order: fitment and setup
Here is what to check before ordering this COMP Cams part, and what else people usually plan for.
Fitment notes
- Specs, lead time and warranty come from COMP Cams and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment with the supplier first. It's free and saves a return.
Ask about fitmentPlan the whole job
- Gaskets, seals and hardware. Many jobs reuse parts that should be replaced, such as one-time bolts, gaskets and O-rings. Check what the old part used.
- Fluids. Cooling, brake, fuel and drivetrain jobs often mean topping up or bleeding fluid. Have the right type for your car on hand.
More for your car: Pushrods