• Comp Cams Dual Taper 7/16" .165" Wall Pushrod (8.850")
  • Comp Cams Dual Taper 7/16" .165" Wall Pushrod (8.850")
1 2

COMP Cams

Comp Cams Dual Taper 7/16" .165" Wall Pushrod (8.850")

Comp Cams Dual Taper 7/16" .165" Wall Pushrod (8.850")

$28.95 USD
$28.95 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Dual Taper 7/16", .165" Wall Pushrods from COMP Cams® are designed with the middle of the pushrod being larger in diameter than the two ends. The extra clearance at the top and the bottom offers the benefits of a large, 7/16" pushrod combined with clearance of a 3/8" option for a higher-flowing intake port. The pushrods are also tapered to clear the top of most offset roller lifters. Both 5/16" ball ends have a 210? radius to provide additional clearance to the rocker arm adjuster at peak lift. The thicker .165"wall is stiffer and stronger than previous .125" wall offerings, thereby providing more accurate valve motion and durability. The pushrods are made in the U.S.A. from one-piece, heat-treated 4130 chromemoly steel tubing, which makes them stronger than most pushrods on the market today.

Features:

Single (1) 8.850" Pushrod

Middle of pushrod is larger in diameter than both ends

Offers the benefits of a large, 7/16" pushrod combined w/ the clearance of a 3/8"

Both 5/16" ball ends have a 210? radius to provide additional rocker clearance at peak lift

.165" wall is stiffer & stronger than previous .125" offerings; More accurate valve motion & durability

Made in the USA from one-piece, heat-treated 4130 chromemoly steel tubing, making them stronger than most pushrods on the market today

View full details

Before you order: fitment and setup

Use the notes below to make sure this one fits before you order.

Fitment notes

  • Specs, lead time and warranty come from COMP Cams and can change. The details above this guide are the latest we have.

Not sure it fits? Message us your car's details and we'll double-check fitment with the supplier before you buy.

Ask about fitment

Plan the whole job

  • Gaskets, seals and hardware. Many jobs reuse parts that should be replaced, such as one-time bolts, gaskets and O-rings. Check what the old part used.
  • Fluids. Cooling, brake, fuel and drivetrain jobs often mean topping up or bleeding fluid. Have the right type for your car on hand.

More for your car: Pushrods

Questions

Will this fit my car?
Check the product title and details for the vehicles it is listed for. If you are not sure, contact us with your year, make, model and trim and we will confirm fitment with the supplier before you order.
Do I need an alignment after installing this?
An alignment is a good idea after any suspension change.
Who do I contact with questions?
Contact us with your vehicle details and we will check with the supplier.
Where do specs and warranty details come from?
From COMP Cams. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.
More parts for this car
PushrodsAll COMP Cams