Cometic
Cometic Honda K Series 88.5mm Bore .030 inch MLS Head Gasket
Cometic Honda K Series 88.5mm Bore .030 inch MLS Head Gasket
Part number: CGSH2005SP1030S
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Honda K SeriesFitment notes & questions
Cometic 88.5mm Bore .030 inch MLS Head Gasket for the Honda K Series. Key specs: center bore 88.5 mm. A failed head gasket can mix coolant and oil, push coolant out of the system or cause overheating, so it is a job worth doing once and doing right.
Specifications
- Brand: Cometic
- Part type: Head gasket
- Center bore: 88.5 mm
Fitment for the Honda K Series
Listed for the Honda K Series. Check your year, model and trim against the title before you order.
What it does
The head gasket seals the cylinder head to the block, keeping combustion pressure in the cylinders and coolant and oil in their own passages. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Most head gaskets call for new head bolts and a flat, clean deck surface. Check the head and block before you reassemble.
- Head bolts: Many engines use torque-to-yield head bolts that should not be reused.
- Coolant: Refill with the coolant type your engine calls for.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What size is it?
Center bore: 88.5 mm.
Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.
What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (Honda K Series).
About this head gasket for the Honda K Series
Head gasket jobs take the top of the engine apart, which is why most people replace the related gaskets and bolts at the same time.
Fitment notes
- Listed for: Honda K Series.
- Specs, lead time and warranty come from Cometic and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentParts that usually go with it
- Head bolts. Many engines use torque-to-yield head bolts that should not be reused.
- Coolant. Refill with the coolant type your engine calls for.
- Valve cover and intake gaskets. They come off during the job, so it is the time to replace them.
More for your car: Honda Parts · All Head Gaskets · Engine
Questions about Honda K Series head gasket
Will this fit my Honda K Series?
What are signs of a bad head gasket?
Should I resurface the cylinder head?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.