Cometic
Cometic 96-07 Dodge Viper 4.125 inch Bore .030 inch MLS Headgasket
Cometic 96-07 Dodge Viper 4.125 inch Bore .030 inch MLS Headgasket
Part number: CGSC5815-030
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Dodge Viper 4.125Fitment notes & questions
Cometic 4.125 inch Bore .030 inch MLS Headgasket for the 1996–2007 Dodge Viper. A failed head gasket can mix coolant and oil, push coolant out of the system or cause overheating, so it is a job worth doing once and doing right.
Specifications
- Brand: Cometic
- Part type: Head gasket
Fitment for the 1996–2007 Dodge Viper
Listed for the 1996–2007 Dodge Viper. Check your year, model and trim against the title before you order.
What it does
The head gasket seals the cylinder head to the block, keeping combustion pressure in the cylinders and coolant and oil in their own passages. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Most head gaskets call for new head bolts and a flat, clean deck surface. Check the head and block before you reassemble.
- Head bolts: Many engines use torque-to-yield head bolts that should not be reused.
- Coolant: Refill with the coolant type your engine calls for.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.
What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (1996–2007 Dodge Viper).
Good to know
- Warranty: Warranty
Before you order: Dodge Viper 4.125 head gasket fitment
The head gasket seals the cylinder head to the block, keeping combustion pressure in the cylinders and coolant and oil in their own passages.
Fitment notes
- Listed for: Dodge Viper 4.125.
- Model years: 96-07. Check your car's year falls inside this range.
- Specs, lead time and warranty come from Cometic and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentPlan the whole job
- Head bolts. Many engines use torque-to-yield head bolts that should not be reused.
- Coolant. Refill with the coolant type your engine calls for.
- Valve cover and intake gaskets. They come off during the job, so it is the time to replace them.
More for your car: Dodge Parts · All Head Gaskets · Engine
Questions about Dodge Viper 4.125 head gasket
Will this fit my Dodge Viper 4.125?
What are signs of a bad head gasket?
Should I resurface the cylinder head?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.