Brass Snow Foam Lance for Pressure Washer | Compatible with Karcher Elitech Bort AR Bosch

Brass Snow Foam Lance from Bosch. Key specs: material Brass and ABS, capacity 1000 ml / 32 oz and maximum water temperature 60°C / 140°F. Thread type and size must match on both sides; AN, NPT and metric threads do not mix.

Key features

• Brass and ABS Build — It has a brass manifold and an ABS body, so the lance is built from both materials
• Adjustable Fan Nozzle — The nozzle adjusts from a pencil stream to a wide fan of up to 60 degrees, in both vertical and horizontal directions
• Suction Filter — A stainless steel suction filter with a ball keeps debris out of the system
• Two Nozzle Sizes — It includes a 1.25mm standard nozzle for 1850–5000 PSI washers and an extra 1.10mm nozzle for 800–1850 PSI washers
• This brass snow foam lance attaches to a pressure washer and mixes water with car shampoo to make thick foam. The lance has a brass and ABS build and a 1000 ml (32 oz) bottle
• Use the lance with a pressure washer rated between 800 and 5000 PSI
• Mix about 1 part car shampoo with 5 parts water in the bottle
• For washers rated 800–1850 PSI, fit the 1.10mm nozzle. For washers rated 1850–5000 PSI, use the 1.25mm standard nozzle

Specifications

• Brand: Bosch
• Part type: Fitting
• Material: Brass and ABS
• Capacity: 1000 ml / 32 oz
• Interface: G1/4" Female
• Required Pressure: 55 bar / 800 PSI minimum
• Maximum Pressure: 350 bar / 5000 PSI
• Maximum Water Temperature: 60°C / 140°F

Options

• Color: For Nilfisk KEW, For Quick Plug, For Portland Husky, For Kranzle M22 F, For HD EasyForce, For Karcher HD Old, For Daewoo Bort, For Nilfisk Stihl, For Anlu Kolher, For Lavor Sterwins, For Ar Makita, For Karcher K

Fitment

This listing does not name specific vehicles. Match the part number and the specifications with the part you are replacing.

What it does

Fittings and hardware connect lines, hoses and parts securely. The right fitting, thread and size keeps a connection sealed and secure, which matters most on fuel, oil, coolant and brake lines.

Installation & tips

• Confirm thread type and size on both sides, and use the right sealant or none as the fitting type requires.
• Hose: Match hose size to the fitting.
• Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.

FAQ

What is the brass snow foam lance made of?
The listing gives the material as brass and ABS.

Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.

What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.

Before you order

• Measure the part you are replacing and compare it with the specifications above.