• APEXi A'PEXi - N1 Evolution Damper - Mitsubishi Lancer Evolution X (2008-2013)
1 1

APEXi

APEXi A'PEXi - N1 Evolution Damper - Mitsubishi Lancer Evolution X (2008-2013)

APEXi A'PEXi - N1 Evolution Damper - Mitsubishi Lancer Evolution X (2008-2013)

$2,999.00 USD
$2,999.00 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Mitsubishi Lancer EvolutionFitment notes & questions

APEXi A'PEXi, listed for 2008–2013 Mitsubishi Lancer Evolution. Bouncing, nose dive under braking and uneven tire wear are signs they are worn.

Quick facts

  • Brand: APEXi
  • Part type: Shock
  • Listed for: 2008–2013 Mitsubishi Lancer Evolution
  • Part number: 264CM023

Specifications

  • Bolt-On: Yes
  • Damper Model: N1 Evolution Damper
  • Chassis: CZ4A
  • Piston Diameter: 46mm.
  • Spring: Length / Rate: Front: 8 inch/10K, Rear: 9 inch/7K
  • Damper Camber Adjustment: Front: Yes, Rear: Not applicable
  • Damper Height Adjustment Range (mm.): Front: 0~-75, Rear: +10~-70
  • Special Notes: Call for stock status and Special Order
  • WARNING: California Prop 65

Tip: Replace shocks in pairs on the same axle, and get an alignment after strut work.

View full details

About this shock for the Mitsubishi Lancer Evolution

Shocks and struts are normally replaced in pairs on the same axle.

Fitment notes

  • Listed for: Mitsubishi Lancer Evolution.
  • Specs, lead time and warranty come from APEXi and can change. The details above this guide are the latest we have.

Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.

Ask about fitment

Parts that usually go with it

More for your car: Mitsubishi Parts · Suspension & steering

Questions about Mitsubishi Lancer Evolution shocks or struts

Will this fit my Mitsubishi Lancer Evolution?
It is listed for the Mitsubishi Lancer Evolution. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
Should I replace them in pairs?
Yes, on the same axle, so both sides behave the same.
Where do specs and warranty details come from?
From APEXi. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.
More parts for this car
Mitsubishi PartsAll APEXi