DNJ
DNJ 2016 Subaru Legacy 3.6L Valve Lifter
DNJ 2016 Subaru Legacy 3.6L Valve Lifter
Part number: LIF729_29
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Subaru Legacy 3.6LFitment notes & questions
DNJ Valve Lifter for the 2016 Subaru Legacy with the 3.6L engine. A ticking noise from the top of the engine is often a worn or collapsed lifter. Part number: LIF729_29.
Key features
- Exhaust position
- Made for EZ30D 24V DOHC engines
- Listed for H6 3.0L, 3.6L DOHC 24V engines
Specifications
- Brand: DNJ
- Part type: Lifter set
- Part number: LIF729_29
- Position: Exhaust
- Engine: 3.6L
- Engine code: EZ30D 24V DOHC
Fitment for the 2016 Subaru Legacy
- Years: 2005–2018
- Vehicles: Subaru
- Cylinders: H6
- Engine: 3.0L, 3.6L DOHC 24V
- Engine codes: EZ30D, EZ36D
Check your year, model, engine and trim against this list before you order.
What it does
Lifters ride on the camshaft and pass its motion to the pushrods or valves. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Soak hydraulic lifters in oil before installation and set preload as your engine requires.
- Camshaft: Flat-tappet lifters should not go on a used cam.
- Pushrods: Check pushrods for straightness while they are out.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this valve lifter?
LIF729_29 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 3.6L EZ30D 24V DOHC engine in the 2016 Subaru Legacy. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the exhaust position. If you are replacing both sides, check whether you need one of each.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (2016 Subaru Legacy 3.6L).
- Check the position: this part is listed as exhaust.
- Compare part number LIF729_29 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Before you order: Subaru Legacy 3.6L lifter set fitment
Lifters ride on the camshaft and pass its motion to the pushrods or valves.
Fitment notes
- Listed for: Subaru Legacy 3.6L.
- Engine: check the engine size listed against your vehicle's VIN or under-hood label.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentPlan the whole job
- Camshaft. Flat-tappet lifters should not go on a used cam.
- Pushrods. Check pushrods for straightness while they are out.
More for your car: Subaru Parts · All Lifters · Engine
Questions about Subaru Legacy 3.6L lifters
Will this fit my Subaru Legacy 3.6L?
What causes lifter tick?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.