DNJ
DNJ 2016 Nissan Juke 1.6L Intake Valve
DNJ 2016 Nissan Juke 1.6L Intake Valve
Part number: IV678_6
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Nissan Juke 1.6LFitment notes & questions
Intake Valve from DNJ, listed for the 2016 Nissan Juke with the 1.6L engine. Intake valves let the air and fuel mixture into the cylinder; exhaust valves let the burned gases out. Part number: IV678_6.
Key features
- Intake position
- Made for MR16DDT 16V Turbocharged DOHC engines
- Listed for L4 1.6L DOHC 16V engines
Specifications
- Brand: DNJ
- Part type: Valve
- Part number: IV678_6
- Position: Intake
- Engine: 1.6L
- Engine code: MR16DDT 16V Turbocharged DOHC
Fitment for the 2016 Nissan Juke
- Years: 2011–2015
- Vehicles: Nissan
- Cylinders: L4
- Engine: 1.6L DOHC 16V
- Engine codes: MR16DDT
Check your year, model, engine and trim against this list before you order.
What it does
Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Have the valve seats cut or lapped so the new valves seal fully.
- Valve stem seals: Always new with new valves.
- Head gasket: The head comes off for this job.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this intake valve?
IV678_6 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 1.6L MR16DDT 16V Turbocharged DOHC engine in the 2016 Nissan Juke. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the intake position. If you are replacing both sides, check whether you need one of each.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (2016 Nissan Juke 1.6L).
- Check the position: this part is listed as intake.
- Compare part number IV678_6 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
About this valve for the Nissan Juke 1.6L
Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job.
Fitment notes
- Listed for: Nissan Juke 1.6L.
- Engine: the same car can take different parts for each engine option, so check yours.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.
Ask about fitmentParts that usually go with it
- Valve stem seals. Always new with new valves.
- Head gasket. The head comes off for this job.
More for your car: Nissan Intake Valves · Nissan Parts · All Intake Valves · Engine
Questions about Nissan Juke 1.6L engine valves
Will this fit my Nissan Juke 1.6L?
How do I know a valve is bad?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.