DNJ
DNJ 2016 Cadillac ATS 2.0L Intake Valve
DNJ 2016 Cadillac ATS 2.0L Intake Valve
Part number: IV348_23
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Cadillac ATS 2.0LFitment notes & questions
Intake Valve by DNJ, made to fit the 2016 Cadillac ATS with the 2.0L engine as listed below. Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job. Part number: IV348_23.
Key features
- Intake position
- Made for LTG VIN X Ecotec 16V Turbocharged DOHC engines
- Listed for L4 2.0L, 2.5L 122, 153 DOHC 16V engines
Specifications
- Brand: DNJ
- Part type: Valve
- Part number: IV348_23
- Position: Intake
- Engine: 2.0L
- Engine code: LTG VIN X Ecotec 16V Turbocharged DOHC
Fitment for the 2016 Cadillac ATS
- Years: 2013–2017
- Vehicles: GM
- Cylinders: L4
- Displacement: 2.0L, 2.5L
- Engine: 122, 153 DOHC 16V
- Engine codes: LCV, LKW, LTG
Check your year, model, engine and trim against this list before you order.
What it does
Burned or bent valves cause misfires and low compression. Guides that wear let valves wobble and burn oil. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Have the valve seats cut or lapped so the new valves seal fully.
- Valve stem seals: Always new with new valves.
- Head gasket: The head comes off for this job.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this intake valve?
IV348_23 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 2.0L LTG VIN X Ecotec 16V Turbocharged DOHC engine in the 2016 Cadillac ATS. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the intake position. If you are replacing both sides, check whether you need one of each.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (2016 Cadillac ATS 2.0L).
- Check the position: this part is listed as intake.
- Compare part number IV348_23 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
DNJ engine valves for the Cadillac ATS 2.0L: what to know
Burned or bent valves cause misfires and low compression. Guides that wear let valves wobble and burn oil.
Fitment notes
- Listed for: Cadillac ATS 2.0L.
- Engine: match the engine size and code to your vehicle; the same model often came with several engines.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentWhat else to plan for
- Valve stem seals. Always new with new valves.
- Head gasket. The head comes off for this job.
More for your car: Cadillac Intake Valves · Cadillac Parts · All Intake Valves · Engine
Questions about Cadillac ATS 2.0L engine valves
Will this fit my Cadillac ATS 2.0L?
How do I know a valve is bad?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.