DNJ
DNJ 2016 Buick Envision 2.0L Intake Manifold Gasket
DNJ 2016 Buick Envision 2.0L Intake Manifold Gasket
Part number: IG348_21
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Buick Envision 2.0LFitment notes & questions
DNJ Intake Manifold Gasket for the 2016 Buick Envision with the 2.0L engine. Gaskets seal the joints between engine parts so oil, coolant and air stay where they belong. Part number: IG348_21.
Key features
- Intake position
- Made for LTG VIN X Ecotec 16V Turbocharged DOHC engines
- Listed for L4 2.0L, 2.5L 122, 153 DOHC 16V engines
Specifications
- Brand: DNJ
- Part type: Gasket
- Part number: IG348_21
- Position: Intake
- Engine: 2.0L
- Engine code: LTG VIN X Ecotec 16V Turbocharged DOHC
Fitment for the 2016 Buick Envision
- Years: 2013–2017
- Vehicles: GM
- Cylinders: L4
- Displacement: 2.0L, 2.5L
- Engine: 122, 153 DOHC 16V
- Engine codes: LCV, LKW, LTG
Check your year, model, engine and trim against this list before you order.
What it does
Replacing a gasket is usually more labor than parts, so it pays to replace any others you disturb on the way in. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Clean both mating surfaces completely and follow the bolt torque and sequence for your engine.
- Sealant where called for: Some joints need a dab of sealant at corners or seams; others must go on dry.
- Bolts and grommets: Rubber grommets and old bolts are worth replacing if they are damaged.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this intake manifold gasket?
IG348_21 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 2.0L LTG VIN X Ecotec 16V Turbocharged DOHC engine in the 2016 Buick Envision. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the intake position. If you are replacing both sides, check whether you need one of each.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (2016 Buick Envision 2.0L).
- Check the position: this part is listed as intake.
- Compare part number IG348_21 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
About this gasket for the Buick Envision 2.0L
Replacing a gasket is usually more labor than parts, so it pays to replace any others you disturb on the way in.
Fitment notes
- Listed for: Buick Envision 2.0L.
- Engine: the same car can take different parts for each engine option, so check yours.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentParts that usually go with it
- Sealant where called for. Some joints need a dab of sealant at corners or seams; others must go on dry.
- Bolts and grommets. Rubber grommets and old bolts are worth replacing if they are damaged.
More for your car: Buick Parts · Engine
Questions about Buick Envision 2.0L gasket
Will this fit my Buick Envision 2.0L?
Do I need sealant with this gasket?
Can I reuse an old gasket?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.