DNJ
DNJ 2014 Nissan Quest 3.5L Intake Valve
DNJ 2014 Nissan Quest 3.5L Intake Valve
Part number: IV656A_10
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Nissan Quest 3.5LFitment notes & questions
Intake Valve from DNJ, listed for the 2014 Nissan Quest with the 3.5L engine. Intake valves let the air and fuel mixture into the cylinder; exhaust valves let the burned gases out. Part number: IV656A_10.
Key features
- Intake position
- Made for VQ35DE 24V DOHC engines
- Listed for V6 3.5L DOHC 24V engines
Specifications
- Brand: DNJ
- Part type: Valve
- Part number: IV656A_10
- Position: Intake
- Engine: 3.5L
- Engine code: VQ35DE 24V DOHC
Fitment for the 2014 Nissan Quest
- Years: 2007–2016
- Vehicles: Infiniti, Nissan
- Cylinders: V6
- Engine: 3.5L DOHC 24V
- Engine codes: VQ35DE
Check your year, model, engine and trim against this list before you order.
What it does
Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Have the valve seats cut or lapped so the new valves seal fully.
- Valve stem seals: Always new with new valves.
- Head gasket: The head comes off for this job.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this intake valve?
IV656A_10 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 3.5L VQ35DE 24V DOHC engine in the 2014 Nissan Quest. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the intake position. If you are replacing both sides, check whether you need one of each.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (2014 Nissan Quest 3.5L).
- Check the position: this part is listed as intake.
- Compare part number IV656A_10 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
About this valve for the Nissan Quest 3.5L
Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job.
Fitment notes
- Listed for: Nissan Quest 3.5L.
- Engine: the same car can take different parts for each engine option, so check yours.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentParts that usually go with it
- Valve stem seals. Always new with new valves.
- Head gasket. The head comes off for this job.
More for your car: Nissan Intake Valves · Nissan Parts · All Intake Valves · Engine
Questions about Nissan Quest 3.5L engine valves
Will this fit my Nissan Quest 3.5L?
How do I know a valve is bad?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.