DNJ 2014 Hyundai Santa Fe Sport 2.0L Intake Manifold Gasket

Sport Intake Manifold Gasket by DNJ, made to fit the 2014 Hyundai Santa Fe with the 2.0L engine as listed below. Replacing a gasket is usually more labor than parts, so it pays to replace any others you disturb on the way in. Part number: IG177_20.

Key features

• Intake position
• Made for VIN B Theta 16V Turbocharged DOHC engines
• Listed for L4 2.0L, 2.4L 122 DOHC 16V engines

Specifications

• Brand: DNJ
• Part type: Gasket
• Part number: IG177_20
• Position: Intake
• Engine: 2.0L
• Engine code: VIN B Theta 16V Turbocharged DOHC

Fitment for the 2014 Hyundai Santa Fe

• Years: 2011–2016
• Vehicles: Hyundai, Kia
• Cylinders: L4
• Displacement: 2.0L, 2.4L
• Engine: 122 DOHC 16V
• Engine codes: THETA II

Check your year, model, engine and trim against this list before you order.

What it does

An old gasket gets hard and shrinks with heat cycles, which is when leaks start. A new gasket restores the seal. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.

Installation & tips

• Clean both mating surfaces completely and follow the bolt torque and sequence for your engine.
• Sealant where called for: Some joints need a dab of sealant at corners or seams; others must go on dry.
• Bolts and grommets: Rubber grommets and old bolts are worth replacing if they are damaged.
• Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
• Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.

FAQ

What is the part number of this sport intake manifold gasket?
IG177_20 (DNJ). Compare it with the number on your old part or in your parts catalog.

Which engine is it for?
It is listed for the 2.0L VIN B Theta 16V Turbocharged DOHC engine in the 2014 Hyundai Santa Fe. Check the engine code on your vehicle if it was offered with more than one engine.

Which side or position does it fit?
It is listed for the intake position. If you are replacing both sides, check whether you need one of each.

Before you order

• Confirm your year, make, model, engine and trim match the fitment listed above (2014 Hyundai Santa Fe 2.0L).
• Check the position: this part is listed as intake.
• Compare part number IG177_20 with your original part.

Good to know

• Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.