DNJ
DNJ 2012 Dodge Durango 3.6L Intake Manifold Gasket
DNJ 2012 Dodge Durango 3.6L Intake Manifold Gasket
Part number: IG1169_18
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Dodge Durango 3.6LFitment notes & questions
DNJ Intake Manifold Gasket for the 2012 Dodge Durango with the 3.6L engine. Replacing a gasket is usually more labor than parts, so it pays to replace any others you disturb on the way in. Part number: IG1169_18.
Key features
- Intake position
- Made for VIN G Pentastar 24V DOHC engines
- Listed for V6 3.2L, 3.6L 198, 220 DOHC 24V engines
Specifications
- Brand: DNJ
- Part type: Gasket
- Part number: IG1169_18
- Position: Intake
- Engine: 3.6L
- Engine code: VIN G Pentastar 24V DOHC
Fitment for the 2012 Dodge Durango
- Years: 2011–2017
- Vehicles: Chrysler, Jeep, Volkswagen
- Cylinders: V6
- Displacement: 3.2L, 3.6L
- Engine: 198, 220 DOHC 24V
- Engine codes: ERB, PENTASTAR
Check your year, model, engine and trim against this list before you order.
What it does
An old gasket gets hard and shrinks with heat cycles, which is when leaks start. A new gasket restores the seal. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Clean both mating surfaces completely and follow the bolt torque and sequence for your engine.
- Sealant where called for: Some joints need a dab of sealant at corners or seams; others must go on dry.
- Bolts and grommets: Rubber grommets and old bolts are worth replacing if they are damaged.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this intake manifold gasket?
IG1169_18 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 3.6L VIN G Pentastar 24V DOHC engine in the 2012 Dodge Durango. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the intake position. If you are replacing both sides, check whether you need one of each.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (2012 Dodge Durango 3.6L).
- Check the position: this part is listed as intake.
- Compare part number IG1169_18 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
DNJ gasket for the Dodge Durango 3.6L: what to know
An old gasket gets hard and shrinks with heat cycles, which is when leaks start. A new gasket restores the seal.
Fitment notes
- Listed for: Dodge Durango 3.6L.
- Engine: match the engine size and code to your vehicle; the same model often came with several engines.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentWhat else to plan for
- Sealant where called for. Some joints need a dab of sealant at corners or seams; others must go on dry.
- Bolts and grommets. Rubber grommets and old bolts are worth replacing if they are damaged.
More for your car: Dodge Intake Manifold Gaskets · Dodge Parts · Engine
Questions about Dodge Durango 3.6L gasket
Will this fit my Dodge Durango 3.6L?
Do I need sealant with this gasket?
Can I reuse an old gasket?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.