• DNJ 2011 Nissan Versa 1.8L Piston Pin Bushing
  • DNJ 2011 Nissan Versa 1.8L Piston Pin Bushing
1 2

DNJ

DNJ 2011 Nissan Versa 1.8L Piston Pin Bushing

DNJ 2011 Nissan Versa 1.8L Piston Pin Bushing

Part number: PB916_86

$19.99 USD
$19.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Nissan Versa 1.8LFitment notes & questions

2011 Nissan Versa 1.8L Piston Pin Bushing from DNJ, listed for 2011 Nissan Versa with the 1.8L engine. Pistons and rings seal the combustion chamber and turn pressure into motion.

Quick facts

  • Brand: DNJ
  • Part type: Piston
  • Listed for: 2011 Nissan Versa
  • Engine: 1.8L
  • Engine code: 1ZZ-FE VIN 8 16V DOHC
  • Part number: PB916_86

Listed fitment

  • [1998-2019] GM, HONDA, LEXUS, NISSAN, SCION, TOYOTA / L4 / 1.8L, 2.0L / 110 DOHC, SOHC 16V [(1ZZFE, 2ZRFE, 2ZRFXE, 2ZZGE, MR18DE, MR20DE, R18A1, R18Z1, R18Z9)]

Good to know

  • Notes: One Set Services Complete Engine
  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Check ring end gaps in the bore before installation and stagger the gaps.

View full details

About this piston for the Nissan Versa 1.8L

Piston and ring size depends on the bore, so match them to your block after it is measured.

Fitment notes

  • Listed for: Nissan Versa 1.8L.
  • Engine: the same car can take different parts for each engine option, so check yours.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.

Ask about fitment

Parts that usually go with it

  • Bearings. Rod and main bearings are usually replaced at the same time.
  • Gasket set. The engine comes apart for this job.

More for your car: Nissan Parts · All Pistons · Engine

Questions about Nissan Versa 1.8L pistons

Will this fit my Nissan Versa 1.8L?
It is listed for the Nissan Versa 1.8L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
Standard or oversize?
Standard fits an unmachined bore. Oversize is for a bored cylinder.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.

Questions & answers

No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.

Ask a question
More parts for this car
Nissan PartsEngineSuspension & steeringAll DNJ