• DNJ 2010 Nissan Altima 2.5L Piston Pin Bushing
  • DNJ 2010 Nissan Altima 2.5L Piston Pin Bushing
1 2

DNJ

DNJ 2010 Nissan Altima 2.5L Piston Pin Bushing

DNJ 2010 Nissan Altima 2.5L Piston Pin Bushing

Part number: PB638_25

$15.99 USD
$15.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Nissan Altima 2.5LFitment notes & questions

2010 Nissan Altima 2.5L Piston Pin Bushing from DNJ, listed for 2010 Nissan Altima with the 2.5L engine. Piston and ring size depends on the bore, so match them to your block after it is measured.

Quick facts

  • Brand: DNJ
  • Part type: Piston
  • Listed for: 2010 Nissan Altima
  • Engine: 2.5L
  • Engine code: QR25DE 16V DOHC
  • Part number: PB638_25

Listed fitment

  • [2002-2017] NISSAN, SUZUKI / L4 / 2.5L / 152 DOHC 16V [(QR25DE)]

Good to know

  • Notes: One Set Services Complete Engine
  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Check ring end gaps in the bore before installation and stagger the gaps.

View full details

DNJ pistons for the Nissan Altima 2.5L: what to know

Worn rings show up as oil burning, blow-by and low compression.

Fitment notes

  • Listed for: Nissan Altima 2.5L.
  • Engine: match the engine size and code to your vehicle; the same model often came with several engines.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.

Ask about fitment

What else to plan for

  • Bearings. Rod and main bearings are usually replaced at the same time.
  • Gasket set. The engine comes apart for this job.

More for your car: Nissan Parts · All Pistons · Engine

Questions about Nissan Altima 2.5L pistons

Will this fit my Nissan Altima 2.5L?
It is listed for the Nissan Altima 2.5L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
Standard or oversize?
Standard fits an unmachined bore. Oversize is for a bored cylinder.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.

Questions & answers

No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.

Ask a question
More parts for this car
Nissan PartsEngineSuspension & steeringAll DNJ