• DNJ 2009 Subaru Outback 3.0L Piston Pin Bushing
  • DNJ 2009 Subaru Outback 3.0L Piston Pin Bushing
1 2

DNJ

DNJ 2009 Subaru Outback 3.0L Piston Pin Bushing

DNJ 2009 Subaru Outback 3.0L Piston Pin Bushing

Part number: PB960_114

$20.99 USD
$20.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Subaru Outback 3.0LFitment notes & questions

2009 Subaru Outback 3.0L Piston Pin Bushing from DNJ, listed for 2009 Subaru Outback with the 3.0L engine. Worn rings show up as oil burning, blow-by and low compression.

Quick facts

  • Brand: DNJ
  • Part type: Piston
  • Listed for: 2009 Subaru Outback
  • Engine: 3.0L
  • Engine code: 1MZ-FE 24V DOHC
  • Part number: PB960_114

Listed fitment

  • [1994-2016] LEXUS, SUBARU, TOYOTA / H6, V6 / 2.5L, 3.0L, 3.5L, 4.0L DOHC 24V [(1GRFE, 1MZFE, 2GRFE, 2GRFSE, 2GRFXE, 3GRFSE, 4GRFSE, EZ30D)]

Good to know

  • Notes: One Set Services Complete Engine
  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Check ring end gaps in the bore before installation and stagger the gaps.

View full details

About this piston for the Subaru Outback 3.0L

Piston and ring size depends on the bore, so match them to your block after it is measured.

Fitment notes

  • Listed for: Subaru Outback 3.0L.
  • Engine: the same car can take different parts for each engine option, so check yours.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.

Ask about fitment

Parts that usually go with it

  • Bearings. Rod and main bearings are usually replaced at the same time.
  • Gasket set. The engine comes apart for this job.

More for your car: Subaru Parts · All Pistons · Engine

Questions about Subaru Outback 3.0L pistons

Will this fit my Subaru Outback 3.0L?
It is listed for the Subaru Outback 3.0L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
Standard or oversize?
Standard fits an unmachined bore. Oversize is for a bored cylinder.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.

Questions & answers

No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.

Ask a question
More parts for this car
Subaru PartsEngineSuspension & steeringAll DNJ