DNJ
DNJ 2008 Mini Cooper 1.6L Valve Lifter
DNJ 2008 Mini Cooper 1.6L Valve Lifter
Part number: LIF827A_2
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: MINI Cooper 1.6LFitment notes & questions
Valve Lifter from DNJ, listed for the 2008 Mini Cooper with the 1.6L engine. A ticking noise from the top of the engine is often a worn or collapsed lifter. Part number: LIF827A_2.
Key features
- Exhaust position
- Made for N12B16A 16V Naturally Aspirated DOHC engines
- Listed for L4 1.6L 98 DOHC 16V engines
Specifications
- Brand: DNJ
- Part type: Lifter set
- Part number: LIF827A_2
- Position: Exhaust
- Engine: 1.6L
- Engine code: N12B16A 16V Naturally Aspirated DOHC
Fitment for the 2008 Mini Cooper
- Years: 2007–2016
- Vehicles: Mini
- Cylinders: L4
- Displacement: 1.6L
- Engine: 98 DOHC 16V
- Engine codes: N12B16A, N14B16A, N14B16C, N16B16A, N18B16A, N18B16C
Check your year, model, engine and trim against this list before you order.
What it does
Lifters ride on the camshaft and pass its motion to the pushrods or valves. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Soak hydraulic lifters in oil before installation and set preload as your engine requires.
- Camshaft: Flat-tappet lifters should not go on a used cam.
- Pushrods: Check pushrods for straightness while they are out.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this valve lifter?
LIF827A_2 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 1.6L N12B16A 16V Naturally Aspirated DOHC engine in the 2008 Mini Cooper. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the exhaust position. If you are replacing both sides, check whether you need one of each.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (2008 Mini Cooper 1.6L).
- Check the position: this part is listed as exhaust.
- Compare part number LIF827A_2 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
DNJ lifters for the MINI Cooper 1.6L: what to know
A ticking noise from the top of the engine is often a worn or collapsed lifter.
Fitment notes
- Listed for: MINI Cooper 1.6L.
- Engine: match the engine size and code to your vehicle; the same model often came with several engines.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentWhat else to plan for
- Camshaft. Flat-tappet lifters should not go on a used cam.
- Pushrods. Check pushrods for straightness while they are out.
More for your car: Lifters · All Lifters · Engine
Questions about MINI Cooper 1.6L lifters
Will this fit my MINI Cooper 1.6L?
What causes lifter tick?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.