DNJ
DNJ 2008 Mini Cooper 1.6L Intake Valve
DNJ 2008 Mini Cooper 1.6L Intake Valve
Part number: IV828_4
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: MINI Cooper 1.6LFitment notes & questions
DNJ Intake Valve for the 2008 Mini Cooper with the 1.6L engine. Burned or bent valves cause misfires and low compression. Guides that wear let valves wobble and burn oil. Part number: IV828_4.
Key features
- Intake position
- Made for N14B16A 16V Turbocharged DOHC engines
- Listed for L4 1.6L 98 DOHC, SOHC 16V engines
Specifications
- Brand: DNJ
- Part type: Valve
- Part number: IV828_4
- Position: Intake
- Engine: 1.6L
- Engine code: N14B16A 16V Turbocharged DOHC
Fitment for the 2008 Mini Cooper
- Years: 2002–2012
- Vehicles: Mini
- Cylinders: L4
- Displacement: 1.6L
- Engine: 98 DOHC, SOHC 16V
- Engine codes: N14B16A, N14B16C, W11B16A
Check your year, model, engine and trim against this list before you order.
What it does
Intake valves let the air and fuel mixture into the cylinder; exhaust valves let the burned gases out. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Have the valve seats cut or lapped so the new valves seal fully.
- Valve stem seals: Always new with new valves.
- Head gasket: The head comes off for this job.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this intake valve?
IV828_4 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 1.6L N14B16A 16V Turbocharged DOHC engine in the 2008 Mini Cooper. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the intake position. If you are replacing both sides, check whether you need one of each.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (2008 Mini Cooper 1.6L).
- Check the position: this part is listed as intake.
- Compare part number IV828_4 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
Before you order: MINI Cooper 1.6L valve fitment
Intake valves let the air and fuel mixture into the cylinder; exhaust valves let the burned gases out.
Fitment notes
- Listed for: MINI Cooper 1.6L.
- Engine: check the engine size listed against your vehicle's VIN or under-hood label.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentPlan the whole job
- Valve stem seals. Always new with new valves.
- Head gasket. The head comes off for this job.
More for your car: Intake Valves · All Intake Valves · Engine
Questions about MINI Cooper 1.6L engine valves
Will this fit my MINI Cooper 1.6L?
How do I know a valve is bad?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.