• DNJ 2008 Ford Ranger 2.3L Valve Lifter
1 1

DNJ

DNJ 2008 Ford Ranger 2.3L Valve Lifter

DNJ 2008 Ford Ranger 2.3L Valve Lifter

Part number: LIF462_29

$11.99 USD
$11.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Ford Ranger 2.3LFitment notes & questions

2008 Ford Ranger 2.3L Valve Lifter from DNJ, listed for 2008 Ford Ranger with the 2.3L engine. A ticking noise from the top of the engine is often a worn or collapsed lifter.

Quick facts

  • Brand: DNJ
  • Part type: Lifter set
  • Listed for: 2008 Ford Ranger
  • Engine: 2.3L
  • Engine code: VIN D 16V DOHC
  • Part number: LIF462_29

Listed fitment

  • [2001-2017] FORD [w/ 3.1mm O.D.] / L4 / 2.0L, 2.3L, 2.5L / 122, 138, 140, 152 DOHC 16V [(ATKINSON, DURATEC, DURATEC, i-VCT, ECOBOOST)]

Good to know

  • Notes: w/ 3.1mm O.D., w/ 3.1mm O.D.
  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Soak hydraulic lifters in oil before installation and set preload as your engine requires.

View full details

Before you order: Ford Ranger 2.3L lifter set fitment

Lifters ride on the camshaft and pass its motion to the pushrods or valves.

Fitment notes

  • Listed for: Ford Ranger 2.3L.
  • Engine: check the engine size listed against your vehicle's VIN or under-hood label.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.

Ask about fitment

Plan the whole job

  • Camshaft. Flat-tappet lifters should not go on a used cam.
  • Pushrods. Check pushrods for straightness while they are out.

More for your car: Ford Lifters · Ford Parts · All Lifters · Engine

Questions about Ford Ranger 2.3L lifters

Will this fit my Ford Ranger 2.3L?
It is listed for the Ford Ranger 2.3L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
What causes lifter tick?
Low oil, dirty oil or a worn lifter are the common causes.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.

Questions & answers

No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.

Ask a question
More parts for this car
Ford LiftersLiftersEngineFord PartsAll DNJ