DNJ
DNJ 2008 Dodge Nitro 3.7L Valve Lifter
DNJ 2008 Dodge Nitro 3.7L Valve Lifter
Part number: LIF1102_24
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Dodge Nitro 3.7LFitment notes & questions
Valve Lifter by DNJ, made to fit the 2008 Dodge Nitro with the 3.7L engine as listed below. Lifters wear together with the cam lobes, which is why they are usually replaced with the cam. Part number: LIF1102_24.
Key features
- Made for VIN K 12V SOHC engines
- Listed for V6, V8 3.7L, 4.7L 226, 287 SOHC 12V, 16V engines
Specifications
- Brand: DNJ
- Part type: Lifter set
- Part number: LIF1102_24
- Engine: 3.7L
- Engine code: VIN K 12V SOHC
Fitment for the 2008 Dodge Nitro
- Years: 2002–2013
- Vehicles: Chrysler, Jeep
- Cylinders: V6, V8
- Displacement: 3.7L, 4.7L
- Engine: 226, 287 SOHC 12V, 16V
Check your year, model, engine and trim against this list before you order.
What it does
A ticking noise from the top of the engine is often a worn or collapsed lifter. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Soak hydraulic lifters in oil before installation and set preload as your engine requires.
- Camshaft: Flat-tappet lifters should not go on a used cam.
- Pushrods: Check pushrods for straightness while they are out.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this valve lifter?
LIF1102_24 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 3.7L VIN K 12V SOHC engine in the 2008 Dodge Nitro. Check the engine code on your vehicle if it was offered with more than one engine.
Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (2008 Dodge Nitro 3.7L).
- Compare part number LIF1102_24 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
About this lifter set for the Dodge Nitro 3.7L
Lifters wear together with the cam lobes, which is why they are usually replaced with the cam.
Fitment notes
- Listed for: Dodge Nitro 3.7L.
- Engine: the same car can take different parts for each engine option, so check yours.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentParts that usually go with it
- Camshaft. Flat-tappet lifters should not go on a used cam.
- Pushrods. Check pushrods for straightness while they are out.
More for your car: Dodge Lifters · Dodge Parts · All Lifters · Engine
Questions about Dodge Nitro 3.7L lifters
Will this fit my Dodge Nitro 3.7L?
What causes lifter tick?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.