• DNJ 2008 Dodge Caliber 2.0L Intake Valve
  • DNJ 2008 Dodge Caliber 2.0L Intake Valve
1 2

DNJ

DNJ 2008 Dodge Caliber 2.0L Intake Valve

DNJ 2008 Dodge Caliber 2.0L Intake Valve

Part number: IV167_12

$7.49 USD
$7.49 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Dodge Caliber 2.0LFitment notes & questions

2008 Dodge Caliber 2.0L Intake Valve from DNJ, listed for 2008 Dodge Caliber with the 2.0L engine. Burned or bent valves cause misfires and low compression. Guides that wear let valves wobble and burn oil.

Quick facts

  • Brand: DNJ
  • Part type: Valve
  • Listed for: 2008 Dodge Caliber
  • Engine: 2.0L
  • Engine code: GEMA 16V Naturally Aspirated DOHC
  • Part number: IV167_12

Listed fitment

  • [2007-2017] CHRY, JEEP, MITSUB [Nitride Coated; 1 Groove; 35mm Head Dia.; 5.5mm Stem Dia.; 113.2mm O.A.L.] / L4 / 1.8L, 2.0L, 2.4L / 110, 122, 144 DOHC 16V [(4B11, 4B12, GEMA, GEMA, PZEV, PZEV)]

Good to know

  • Notes: Nitride Coated; 1 Groove; 35mm Head Dia.; 5.5mm Stem Dia.; 113.2mm O.A.L.; Intake
  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Have the valve seats cut or lapped so the new valves seal fully.

View full details

About this valve for the Dodge Caliber 2.0L

Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job.

Fitment notes

  • Listed for: Dodge Caliber 2.0L.
  • Engine: the same car can take different parts for each engine option, so check yours.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.

Ask about fitment

Parts that usually go with it

More for your car: Dodge Intake Valves · Dodge Parts · All Intake Valves · Engine

Questions about Dodge Caliber 2.0L engine valves

Will this fit my Dodge Caliber 2.0L?
It is listed for the Dodge Caliber 2.0L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
How do I know a valve is bad?
A compression or leak-down test shows whether a cylinder is losing pressure past a valve.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.

Questions & answers

No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.

Ask a question
More parts for this car
Dodge Intake ValvesIntake ValvesDodge PartsAll DNJ