• DNJ 2007 Subaru Legacy 2.5L Piston Pin Bushing
  • DNJ 2007 Subaru Legacy 2.5L Piston Pin Bushing
1 2

DNJ

DNJ 2007 Subaru Legacy 2.5L Piston Pin Bushing

DNJ 2007 Subaru Legacy 2.5L Piston Pin Bushing

Part number: PB715_80

$18.99 USD
$18.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Subaru Legacy 2.5LFitment notes & questions

2007 Subaru Legacy 2.5L Piston Pin Bushing from DNJ, listed for 2007 Subaru Legacy with the 2.5L engine. Worn rings show up as oil burning, blow-by and low compression.

Quick facts

  • Brand: DNJ
  • Part type: Piston
  • Listed for: 2007 Subaru Legacy
  • Engine: 2.5L
  • Engine code: 16V Naturally Aspirated SOHC
  • Part number: PB715_80

Listed fitment

  • [1990-2015] SAAB, SUBARU / H4 / 1.8L, 2.0L, 2.2L, 2.5L DOHC, SOHC 16V [(EJ18E, EJ205, EJ22, EJ22T, EJ25, EJ255, EJ257, EJ25D)]

Good to know

  • Notes: EJ22, One Set Services Complete Engine
  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Check ring end gaps in the bore before installation and stagger the gaps.

View full details

Before you order: Subaru Legacy 2.5L piston fitment

Pistons and rings seal the combustion chamber and turn pressure into motion.

Fitment notes

  • Listed for: Subaru Legacy 2.5L.
  • Engine: check the engine size listed against your vehicle's VIN or under-hood label.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.

Ask about fitment

Plan the whole job

  • Bearings. Rod and main bearings are usually replaced at the same time.
  • Gasket set. The engine comes apart for this job.

More for your car: Subaru Parts · All Pistons · Engine

Questions about Subaru Legacy 2.5L pistons

Will this fit my Subaru Legacy 2.5L?
It is listed for the Subaru Legacy 2.5L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
Standard or oversize?
Standard fits an unmachined bore. Oversize is for a bored cylinder.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.

Questions & answers

No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.

Ask a question
More parts for this car
Subaru PartsEngineSuspension & steeringAll DNJ