DNJ
DNJ 2004 Ford E-350 Club Wagon 6.0L Intake Manifold Gasket
DNJ 2004 Ford E-350 Club Wagon 6.0L Intake Manifold Gasket
Part number: IG4214_4
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Ford E-350 ClubFitment notes & questions
Wagon Intake Manifold Gasket from DNJ, listed for the 2004 Ford E-350 Club with the 6.0L engine. An old gasket gets hard and shrinks with heat cycles, which is when leaks start. A new gasket restores the seal. Part number: IG4214_4.
Key features
- Intake position
- Made for VIN P N/R 32V Turbocharged OHV DIESEL engines
- Listed for V8 6.0L 363 OHV 32V engines
Specifications
- Brand: DNJ
- Part type: Gasket
- Part number: IG4214_4
- Position: Intake
- Engine: 6.0L
- Engine code: VIN P N/R 32V Turbocharged OHV DIESEL
Fitment for the 2004 Ford E-350 Club
- Years: 2003–2010
- Vehicles: Ford
- Cylinders: V8
- Displacement: 6.0L
- Engine: 363 OHV 32V
- Engine codes: POWER-STROKE
Check your year, model, engine and trim against this list before you order.
What it does
Gaskets seal the joints between engine parts so oil, coolant and air stay where they belong. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Clean both mating surfaces completely and follow the bolt torque and sequence for your engine.
- Sealant where called for: Some joints need a dab of sealant at corners or seams; others must go on dry.
- Bolts and grommets: Rubber grommets and old bolts are worth replacing if they are damaged.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this wagon intake manifold gasket?
IG4214_4 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 6.0L VIN P N/R 32V Turbocharged OHV DIESEL engine in the 2004 Ford E-350 Club. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the intake position. If you are replacing both sides, check whether you need one of each.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (2004 Ford E-350 Club 6.0L).
- Check the position: this part is listed as intake.
- Compare part number IG4214_4 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
DNJ gasket for the Ford E-350 Club: what to know
An old gasket gets hard and shrinks with heat cycles, which is when leaks start. A new gasket restores the seal.
Fitment notes
- Listed for: Ford E-350 Club.
- Engine: match the engine size and code to your vehicle; the same model often came with several engines.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentWhat else to plan for
- Sealant where called for. Some joints need a dab of sealant at corners or seams; others must go on dry.
- Bolts and grommets. Rubber grommets and old bolts are worth replacing if they are damaged.
More for your car: Ford Intake Manifold Gaskets · Ford Parts · Engine
Questions about Ford E-350 Club gasket
Will this fit my Ford E-350 Club?
Do I need sealant with this gasket?
Can I reuse an old gasket?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.