DNJ
DNJ 2003 Toyota 4Runner 4.7L Piston Pin Bushing
DNJ 2003 Toyota 4Runner 4.7L Piston Pin Bushing
Part number: PB972_49
Regular price
$36.99 USD
Regular price
Sale price
$36.99 USD
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Toyota 4Runner 4.7LFitment notes & questions
DNJ 2003 Toyota 4Runner 4.7L Piston Pin Bushing, listed for 2003 Toyota 4Runner with the 4.7L engine. Worn rings show up as oil burning, blow-by and low compression.
Quick facts
- Brand: DNJ
- Part type: Piston
- Listed for: 2003 Toyota 4Runner
- Engine: 4.7L
- Engine code: 1UZ-FE 32V DOHC
- Part number: PB972_49
Listed fitment
- [1990-2010] LEXUS, TOYOTA / V8 / 4.0L, 4.3L, 4.7L / 285 DOHC 32V [(1UZFE, 2UZFE, 3UZFE)]
Good to know
- Notes: One Set Services Complete Engine
- Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
Tip: Check ring end gaps in the bore before installation and stagger the gaps.
Before you order: Toyota 4Runner 4.7L piston fitment
Pistons and rings seal the combustion chamber and turn pressure into motion.
Fitment notes
- Listed for: Toyota 4Runner 4.7L.
- Engine: check the engine size listed against your vehicle's VIN or under-hood label.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentPlan the whole job
- Bearings. Rod and main bearings are usually replaced at the same time.
- Gasket set. The engine comes apart for this job.
More for your car: Toyota Parts · All Pistons · Engine
Questions about Toyota 4Runner 4.7L pistons
Will this fit my Toyota 4Runner 4.7L?
It is listed for the Toyota 4Runner 4.7L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
Standard or oversize?
Standard fits an unmachined bore. Oversize is for a bored cylinder.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.
Ask a question
More parts for this car