DNJ
DNJ 2002 Buick Rendezvous 3.4L Valve Lifter
DNJ 2002 Buick Rendezvous 3.4L Valve Lifter
Part number: LIF328_148
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Buick Rendezvous 3.4LFitment notes & questions
DNJ 2002 Buick Rendezvous 3.4L Valve Lifter, listed for 2002 Buick Rendezvous with the 3.4L engine. A ticking noise from the top of the engine is often a worn or collapsed lifter.
Quick facts
- Brand: DNJ
- Part type: Lifter set
- Listed for: 2002 Buick Rendezvous
- Engine: 3.4L
- Engine code: 12V OHV
- Part number: LIF328_148
Listed fitment
- [1993-2011] GM, ISUZU, SATU / L4, V6 / 2.2L, 3.1L, 3.4L, 3.5L, 3.9L / 134, 191, 207, 213, 237 OHV 12V, 8V [(VORTEC)]
Good to know
- Notes: 1ST DESIGN
- Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
Tip: Soak hydraulic lifters in oil before installation and set preload as your engine requires.

Before you order: Buick Rendezvous 3.4L lifter set fitment
Lifters ride on the camshaft and pass its motion to the pushrods or valves.
Fitment notes
- Listed for: Buick Rendezvous 3.4L.
- Engine: check the engine size listed against your vehicle's VIN or under-hood label.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentPlan the whole job
- Camshaft. Flat-tappet lifters should not go on a used cam.
- Pushrods. Check pushrods for straightness while they are out.
More for your car: Buick Parts · All Lifters · Engine
Questions about Buick Rendezvous 3.4L lifters
Will this fit my Buick Rendezvous 3.4L?
What causes lifter tick?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.