DNJ
DNJ 2001 Ford Ranger 2.5L Intake Valve
DNJ 2001 Ford Ranger 2.5L Intake Valve
Regular price
$6.49 USD
Regular price
Sale price
$6.49 USD
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Ford Ranger 2.5LFitment notes & questions
2001 Ford Ranger 2.5L Intake Valve from DNJ, listed for 2001 Ford Ranger with the 2.5L engine. Intake valves let the air and fuel mixture into the cylinder; exhaust valves let the burned gases out.
Quick facts
- Brand: DNJ
- Part type: Valve
- Listed for: 2001 Ford Ranger
- Engine: 2.5L
- Engine code: 8V SOHC
- Part number: IV448_13
Listed fitment
- [1995-2001] FORD, MAZDA [Nitride Coated; 3 Groove; 44mm Head Dia.; 7mm Stem Dia.; 121.6mm O.A.L.] / L4 / 2.3L, 2.5L / 140, 153 SOHC 8V
Good to know
- Notes: Nitride Coated; 3 Groove; 44mm Head Dia.; 7mm Stem Dia.; 121.6mm O.A.L.; Intake
- Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
Tip: Have the valve seats cut or lapped so the new valves seal fully.
About this valve for the Ford Ranger 2.5L
Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job.
Fitment notes
- Listed for: Ford Ranger 2.5L.
- Engine: the same car can take different parts for each engine option, so check yours.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentParts that usually go with it
- Valve stem seals. Always new with new valves.
- Head gasket. The head comes off for this job.
More for your car: Ford Intake Valves · Ford Parts · All Intake Valves · Engine
Questions about Ford Ranger 2.5L engine valves
Will this fit my Ford Ranger 2.5L?
It is listed for the Ford Ranger 2.5L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
How do I know a valve is bad?
A compression or leak-down test shows whether a cylinder is losing pressure past a valve.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.
More parts for this car