DNJ
DNJ 1997 Buick Century 3.1L Valve Lifter
DNJ 1997 Buick Century 3.1L Valve Lifter
Part number: LIF328_64
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Buick Century 3.1LFitment notes & questions
DNJ 1997 Buick Century 3.1L Valve Lifter, listed for 1997 Buick Century with the 3.1L engine. A ticking noise from the top of the engine is often a worn or collapsed lifter.
Quick facts
- Brand: DNJ
- Part type: Lifter set
- Listed for: 1997 Buick Century
- Engine: 3.1L
- Engine code: 12V OHV
- Part number: LIF328_64
Listed fitment
- [1993-2011] GM, ISUZU, SATU / L4, V6 / 2.2L, 3.1L, 3.4L, 3.5L, 3.9L / 134, 191, 207, 213, 237 OHV 12V, 8V [(VORTEC)]
Good to know
- Notes: 1ST DESIGN
- Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
Tip: Soak hydraulic lifters in oil before installation and set preload as your engine requires.

About this lifter set for the Buick Century 3.1L
Lifters wear together with the cam lobes, which is why they are usually replaced with the cam.
Fitment notes
- Listed for: Buick Century 3.1L.
- Engine: the same car can take different parts for each engine option, so check yours.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentParts that usually go with it
- Camshaft. Flat-tappet lifters should not go on a used cam.
- Pushrods. Check pushrods for straightness while they are out.
More for your car: Buick Parts · All Lifters · Engine
Questions about Buick Century 3.1L lifters
Will this fit my Buick Century 3.1L?
What causes lifter tick?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.