• DNJ 1996 Subaru Legacy 2.2L Intake Valve
  • DNJ 1996 Subaru Legacy 2.2L Intake Valve
1 2

DNJ

DNJ 1996 Subaru Legacy 2.2L Intake Valve

DNJ 1996 Subaru Legacy 2.2L Intake Valve

Part number: IV708_7

$9.99 USD
$9.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Subaru Legacy 2.2LFitment notes & questions

DNJ 1996 Subaru Legacy 2.2L Intake Valve, listed for 1996 Subaru Legacy with the 2.2L engine. Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job.

Quick facts

  • Brand: DNJ
  • Part type: Valve
  • Listed for: 1996 Subaru Legacy
  • Engine: 2.2L
  • Engine code: 16V Naturally Aspirated SOHC
  • Part number: IV708_7

Listed fitment

  • [1990-1998] SUBARU [Nitride Coated; 1 Groove; 32.5mm Head Dia.; 6mm Stem Dia.; 101mm O.A.L.] / H4 / 2.2L SOHC 16V [(EJ22, EJ22T)]

Good to know

  • Notes: EJ22, Nitride Coated; 1 Groove; 32.5mm Head Dia.; 6mm Stem Dia.; 101mm O.A.L.; Intake
  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Have the valve seats cut or lapped so the new valves seal fully.

View full details

Before you order: Subaru Legacy 2.2L valve fitment

Intake valves let the air and fuel mixture into the cylinder; exhaust valves let the burned gases out.

Fitment notes

  • Listed for: Subaru Legacy 2.2L.
  • Engine: check the engine size listed against your vehicle's VIN or under-hood label.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.

Ask about fitment

Plan the whole job

More for your car: Subaru Intake Valves · Subaru Parts · All Intake Valves · Engine

Questions about Subaru Legacy 2.2L engine valves

Will this fit my Subaru Legacy 2.2L?
It is listed for the Subaru Legacy 2.2L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
How do I know a valve is bad?
A compression or leak-down test shows whether a cylinder is losing pressure past a valve.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.

Questions & answers

No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.

Ask a question
More parts for this car
Subaru Intake ValvesSubaru PartsIntake ValvesAll DNJ