• DNJ 1996 Audi Cabriolet 2.8L Intake Valve
  • DNJ 1996 Audi Cabriolet 2.8L Intake Valve
1 2

DNJ

DNJ 1996 Audi Cabriolet 2.8L Intake Valve

DNJ 1996 Audi Cabriolet 2.8L Intake Valve

Part number: IV808_16

$9.49 USD
$9.49 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Audi Cabriolet 2.8LFitment notes & questions

1996 Audi Cabriolet 2.8L Intake Valve from DNJ, listed for 1996 Audi Cabriolet with the 2.8L engine. Burned or bent valves cause misfires and low compression. Guides that wear let valves wobble and burn oil.

Quick facts

  • Brand: DNJ
  • Part type: Valve
  • Listed for: 1996 Audi Cabriolet
  • Engine: 2.8L
  • Engine code: ABA 8V SOHC
  • Part number: IV808_16

Listed fitment

  • [1993-2006] AUDI, VOLKS [Nitride Coated; 3 Groove; 39.4mm Head Dia.; 7mm Stem Dia.; 91.6mm O.A.L.] / L4, V6 / 2.0L, 2.8L / 121 SOHC 12V, 8V [(ABA, AEG, AFC, AVH, AZG, BEV, BBW, BDC, BGD)]

Good to know

  • Notes: Nitride Coated; 3 Groove; 39.4mm Head Dia.; 7mm Stem Dia.; 91.6mm O.A.L.; Intake
  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Have the valve seats cut or lapped so the new valves seal fully.

View full details

About this valve for the Audi Cabriolet 2.8L

Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job.

Fitment notes

  • Listed for: Audi Cabriolet 2.8L.
  • Engine: the same car can take different parts for each engine option, so check yours.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.

Ask about fitment

Parts that usually go with it

More for your car: Audi Parts · All Intake Valves · Engine

Questions about Audi Cabriolet 2.8L engine valves

Will this fit my Audi Cabriolet 2.8L?
It is listed for the Audi Cabriolet 2.8L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
How do I know a valve is bad?
A compression or leak-down test shows whether a cylinder is losing pressure past a valve.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.

Questions & answers

No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.

Ask a question
More parts for this car
Audi PartsIntake ValvesAll DNJ