DNJ
DNJ 1995 Dodge Avenger 2.5L Rocker Arm
DNJ 1995 Dodge Avenger 2.5L Rocker Arm
Part number: IRA153B_13
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Dodge Avenger 2.5LFitment notes & questions
Rocker Arm by DNJ, made to fit the 1995 Dodge Avenger with the 2.5L engine as listed below. Higher-ratio rockers add valve lift without changing the cam. Part number: IRA153B_13.
Key features
- Intake position
- Made for VIN G 16V SOHC engines
- Listed for L4, V6 2.0L, 2.4L, 2.5L, 3.0L, 3.5L 122, 143, 152, 181, 215 SOHC 12V, 16V, 24V engines
Specifications
- Brand: DNJ
- Part type: Rocker arm
- Part number: IRA153B_13
- Position: Intake
- Engine: 2.5L
- Engine code: VIN G 16V SOHC
Fitment for the 1995 Dodge Avenger
- Years: 1993–2005
- Vehicles: Chrysler, Eagle, Mitsubishi
- Cylinders: L4, V6
- Displacement: 2.0L, 2.4L, 2.5L, 3.0L, 3.5L
- Engine: 122, 143, 152, 181, 215 SOHC 12V, 16V, 24V
- Engine codes: 4G64, 6G72, 6G74, EEB
Check your year, model, engine and trim against this list before you order.
What it does
Worn rocker tips or pivots cause noise and poor valve control. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Check rocker geometry and adjust valve lash or preload after installation.
- Pushrods: Rocker changes can change the pushrod length you need.
- Valve cover gasket: The cover comes off for this job.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this rocker arm?
IRA153B_13 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 2.5L VIN G 16V SOHC engine in the 1995 Dodge Avenger. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the intake position. If you are replacing both sides, check whether you need one of each.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (1995 Dodge Avenger 2.5L).
- Check the position: this part is listed as intake.
- Compare part number IRA153B_13 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
About this rocker arm for the Dodge Avenger 2.5L
Higher-ratio rockers add valve lift without changing the cam.
Fitment notes
- Listed for: Dodge Avenger 2.5L.
- Engine: the same car can take different parts for each engine option, so check yours.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentParts that usually go with it
- Pushrods. Rocker changes can change the pushrod length you need.
- Valve cover gasket. The cover comes off for this job.
More for your car: Dodge Rocker Arms · Dodge Parts · All Rocker Arms · Engine
Questions about Dodge Avenger 2.5L rocker arms
Will this fit my Dodge Avenger 2.5L?
Do I need to adjust valves after new rockers?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.