DNJ
DNJ 1993 Plymouth Colt 1.5L Exhaust Valve
DNJ 1993 Plymouth Colt 1.5L Exhaust Valve
Part number: EV104_12
Regular price
$9.99 USD
Regular price
Sale price
$9.99 USD
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
DNJ 1993 Plymouth Colt 1.5L Exhaust Valve, listed for 1993 Plymouth Colt with the 1.5L engine. Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job.
Quick facts
- Brand: DNJ
- Part type: Valve
- Listed for: 1993 Plymouth Colt
- Engine: 1.5L
- Engine code: 12V SOHC
- Part number: EV104_12
Listed fitment
- [1991-2002] CHRY, EAGLE, MITSUB [Nitride Coated; 1 Groove; 33mm Head Dia., 6.5mm Stem Dia., 101mm O.A.L.] / L4 / 1.5L / 90 SOHC 12V [(4G15)]
Good to know
- Notes: Nitride Coated; 1 Groove; 33mm Head Dia., 6.5mm Stem Dia., 101mm O.A.L.; Exhaust
- Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
Tip: Have the valve seats cut or lapped so the new valves seal fully.

Before you order: fitment and what to plan
Intake valves let the air and fuel mixture into the cylinder; exhaust valves let the burned gases out.
Fitment notes
- Engine: check the engine size listed against your vehicle's VIN or under-hood label.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentPlan the whole job
- Valve stem seals. Always new with new valves.
- Head gasket. The head comes off for this job.
More for your car: Exhaust Valves · All Intake Valves · Engine
Questions about engine valves
Will this fit my car?
Check the title and details above for the vehicles and part number it is listed for. If you are not sure, contact us with your year, make, model, engine and trim and we will confirm fitment before you order.
How do I know a valve is bad?
A compression or leak-down test shows whether a cylinder is losing pressure past a valve.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.
Ask a question
More parts for this car