DNJ
DNJ 1992 Ford Bronco 5.8L Intake Plenum Gasket
DNJ 1992 Ford Bronco 5.8L Intake Plenum Gasket
Part number: MG4182_41
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Ford Bronco 5.8LFitment notes & questions
Intake Plenum Gasket from DNJ, listed for the 1992 Ford Bronco with the 5.8L engine. Cracked plastic manifolds and leaking gaskets cause vacuum leaks, rough idle and lean codes. Part number: MG4182_41.
Key features
- Intake, Set
- Upper position
- Made for VIN H HO 16V OHV engines
Specifications
- Brand: DNJ
- Part type: Intake manifold
- Part number: MG4182_41
- Position: Upper
- Engine: 5.8L
- Engine code: VIN H HO 16V OHV
Fitment for the 1992 Ford Bronco
- Years: 1988–1997
- Vehicles: Ford
- Cylinders: V8
- Displacement: 5.8L
- Engine: 351 OHV 16V
- Engine codes: WINDSOR
Check your year, model, engine and trim against this list before you order.
What it does
The intake manifold carries air from the throttle body to each cylinder. Air and fuel parts decide how well the engine breathes and how cleanly it runs, so the right part restores smooth running and can support more power on a modified engine.
Installation & tips
- Fit new intake gaskets and torque the bolts in sequence to avoid vacuum leaks.
- Intake manifold gaskets: Always new.
- Vacuum hoses: Old hoses crack when disturbed.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this intake plenum gasket?
MG4182_41 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 5.8L VIN H HO 16V OHV engine in the 1992 Ford Bronco. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the upper position. If you are replacing both sides, check whether you need one of each.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (1992 Ford Bronco 5.8L).
- Check the position: this part is listed as upper.
- Compare part number MG4182_41 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
About this intake manifold for the Ford Bronco 5.8L
Performance manifolds change the runner shape to move power up or down the rev range.
Fitment notes
- Listed for: Ford Bronco 5.8L.
- Engine: the same car can take different parts for each engine option, so check yours.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentParts that usually go with it
- Intake manifold gaskets. Always new.
- Vacuum hoses. Old hoses crack when disturbed.
More for your car: Engine · Ford Parts · All Intake Manifolds · Fuel & air intake
Questions about Ford Bronco 5.8L intake manifold
Will this fit my Ford Bronco 5.8L?
What are signs of an intake leak?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.