• DNJ 1992 Ford Bronco 4.9L Intake Valve
1 1

DNJ

DNJ 1992 Ford Bronco 4.9L Intake Valve

DNJ 1992 Ford Bronco 4.9L Intake Valve

Part number: IV4107_61

$7.99 USD
$7.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Ford Bronco 4.9LFitment notes & questions

1992 Ford Bronco 4.9L Intake Valve by DNJ for 1992 Ford Bronco with the 4.9L engine. Intake valves let the air and fuel mixture into the cylinder; exhaust valves let the burned gases out.

Quick facts

  • Brand: DNJ
  • Part type: Valve
  • Listed for: 1992 Ford Bronco
  • Engine: 4.9L
  • Engine code: 12V OHV
  • Part number: IV4107_61

Listed fitment

  • [1968-1996] FORD [Nitride Coated; 1 Groove; 45.2mm Head Dia.; 8.7mm Stem Dia.; 120.7mm O.A.L.] / L6 / 4.9L / 300 OHV 12V

Good to know

  • Notes: Nitride Coated; 1 Groove; 45.2mm Head Dia.; 8.7mm Stem Dia.; 120.7mm O.A.L.; Intake
  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Have the valve seats cut or lapped so the new valves seal fully.

View full details

About this valve for the Ford Bronco 4.9L

Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job.

Fitment notes

  • Listed for: Ford Bronco 4.9L.
  • Engine: the same car can take different parts for each engine option, so check yours.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.

Ask about fitment

Parts that usually go with it

More for your car: Ford Intake Valves · Ford Parts · All Intake Valves · Engine

Questions about Ford Bronco 4.9L engine valves

Will this fit my Ford Bronco 4.9L?
It is listed for the Ford Bronco 4.9L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
How do I know a valve is bad?
A compression or leak-down test shows whether a cylinder is losing pressure past a valve.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.

Questions & answers

No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.

Ask a question
More parts for this car
Ford Intake ValvesIntake ValvesFord PartsAll DNJ