DNJ
DNJ 1991 GMC R2500 Suburban 5.7L Intake Valve
DNJ 1991 GMC R2500 Suburban 5.7L Intake Valve
Part number: IV3125B_1336
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: GMC R2500 SuburbanFitment notes & questions
DNJ Intake Valve for the 1991 GMC R2500 Suburban with the 5.7L engine. Highlights include nitride Coated and 2 Groove. Burned or bent valves cause misfires and low compression. Guides that wear let valves wobble and burn oil. Part number: IV3125B_1336.
Key features
- Nitride Coated
- 2 Groove
- 8mm Head Dia
- 7mm Stem Dia
- 124.6mm O.A.L
Specifications
- Brand: DNJ
- Part type: Valve
- Part number: IV3125B_1336
- Position: Intake
- Engine: 5.7L
- Engine code: U/K 12V OHV
Fitment for the 1991 GMC R2500 Suburban
- Years: 1963–1995
- Vehicles: GM
- Application: Nitride Coated; 2 Groove; 43.8mm Head Dia.; 8.7mm Stem Dia.; 124.6mm O.A.L.
- Cylinders: L6, V8
- Displacement: 4.1L, 4.8L, 5.7L, 6.6L
- Engine: 250, 292, 350, 400 OHV 12V, 16V
- Engine codes: CHEVROLET
Check your year, model, engine and trim against this list before you order.
What it does
Intake valves let the air and fuel mixture into the cylinder; exhaust valves let the burned gases out. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Have the valve seats cut or lapped so the new valves seal fully.
- Valve stem seals: Always new with new valves.
- Head gasket: The head comes off for this job.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this intake valve?
IV3125B_1336 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 5.7L U/K 12V OHV engine in the 1991 GMC R2500 Suburban. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the intake position. If you are replacing both sides, check whether you need one of each.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (1991 GMC R2500 Suburban 5.7L).
- Check the position: this part is listed as intake.
- Compare part number IV3125B_1336 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

DNJ engine valves for the GMC R2500 Suburban: what to know
Burned or bent valves cause misfires and low compression. Guides that wear let valves wobble and burn oil.
Fitment notes
- Listed for: GMC R2500 Suburban.
- Engine: match the engine size and code to your vehicle; the same model often came with several engines.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentWhat else to plan for
- Valve stem seals. Always new with new valves.
- Head gasket. The head comes off for this job.
More for your car: GMC Intake Valves · GMC Parts · All Intake Valves · Engine
Questions about GMC R2500 Suburban engine valves
Will this fit my GMC R2500 Suburban?
How do I know a valve is bad?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.