• DNJ 1989 Buick Electra 3.8L Valve Lifter
  • DNJ 1989 Buick Electra 3.8L Valve Lifter
  • DNJ 1989 Buick Electra 3.8L Valve Lifter
1 3

DNJ

DNJ 1989 Buick Electra 3.8L Valve Lifter

DNJ 1989 Buick Electra 3.8L Valve Lifter

Part number: LIF3104_82

$12.99 USD
$12.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Buick Electra 3.8LFitment notes & questions

1989 Buick Electra 3.8L Valve Lifter by DNJ for 1989 Buick Electra with the 3.8L engine. Lifters wear together with the cam lobes, which is why they are usually replaced with the cam.

Quick facts

  • Brand: DNJ
  • Part type: Lifter set
  • Listed for: 1989 Buick Electra
  • Engine: 3.8L
  • Engine code: VIN 3 Buick 12V Naturally Aspirated OHV,
  • Part number: LIF3104_82

Listed fitment

  • [1982-2017] GM, ISUZU, SAAB / L4, V6, V8 / 2.5L, 3.3L, 3.8L, 4.3L, 4.5L, 4.8L, 4.9L, 5.0L, 5.3L, 5.7L, 6.0L, 6.2L, 7.0L / 151, 204, 231, 262, 265, 273, 293, 298, 305, 325, 350, 364, 376, 427 OHV 12V, 16V, 8V [(BUICK, CHEVROLET, L20, L33, L59, L76, L76, L77, L83

Good to know

  • Notes: Roller Type,
  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Soak hydraulic lifters in oil before installation and set preload as your engine requires.

View full details

Before you order: Buick Electra 3.8L lifter set fitment

Lifters ride on the camshaft and pass its motion to the pushrods or valves.

Fitment notes

  • Listed for: Buick Electra 3.8L.
  • Engine: check the engine size listed against your vehicle's VIN or under-hood label.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.

Ask about fitment

Plan the whole job

  • Camshaft. Flat-tappet lifters should not go on a used cam.
  • Pushrods. Check pushrods for straightness while they are out.

More for your car: Buick Parts · All Lifters · Engine

Questions about Buick Electra 3.8L lifters

Will this fit my Buick Electra 3.8L?
It is listed for the Buick Electra 3.8L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
What causes lifter tick?
Low oil, dirty oil or a worn lifter are the common causes.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.

Questions & answers

No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.

Ask a question
More parts for this car
Buick PartsLiftersEngineAll DNJ