• DNJ 1988 Pontiac 6000 2.8L Cylinder Head Bolt
  • DNJ 1988 Pontiac 6000 2.8L Cylinder Head Bolt
  • DNJ 1988 Pontiac 6000 2.8L Cylinder Head Bolt
  • DNJ 1988 Pontiac 6000 2.8L Cylinder Head Bolt
  • DNJ 1988 Pontiac 6000 2.8L Cylinder Head Bolt
1 5

DNJ

DNJ 1988 Pontiac 6000 2.8L Cylinder Head Bolt

DNJ 1988 Pontiac 6000 2.8L Cylinder Head Bolt

$28.99 USD
$45.28 USD $28.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Pontiac 6000 2.8LFitment notes & questions

1988 Pontiac 6000 2.8L Cylinder Head Bolt from DNJ, listed for 1988 Pontiac 6000 2 with the 2.8L engine. Fresh bolts are cheap insurance on any job that takes the cylinder head off.

Quick facts

  • Brand: DNJ
  • Part type: Head bolt set
  • Listed for: 1988 Pontiac 6000 2
  • Engine: 2.8L
  • Engine code: VIN W 12V OHV
  • Part number: HBK3131_12

Listed fitment

  • [1987-2007] GM / V6 / 2.8L, 3.1L, 3.4L, 3.5L / 173, 191, 207, 213 OHV 12V

Good to know

  • Notes: One Set Services Complete Engine
  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Clean the threads in the block, follow the torque sequence and angle steps for your engine, and do not reuse stretch bolts.

View full details

Before you order: Pontiac 6000 2.8L head bolt set fitment

Head bolts clamp the cylinder head to the block with the force the head gasket needs to seal.

Fitment notes

  • Listed for: Pontiac 6000 2.8L.
  • Engine: check the engine size listed against your vehicle's VIN or under-hood label.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.

Ask about fitment

Plan the whole job

More for your car: Pontiac Parts · Engine

Questions about Pontiac 6000 2.8L head bolt set

Will this fit my Pontiac 6000 2.8L?
It is listed for the Pontiac 6000 2.8L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
Can I reuse my old head bolts?
Not if your engine uses torque-to-yield bolts. Check the service manual; when in doubt, use new ones.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.
More parts for this car
Pontiac PartsEngineAll DNJ