• DNJ 1988 Dodge Raider 2.6L Cylinder Head Gasket
1 1

DNJ

DNJ 1988 Dodge Raider 2.6L Cylinder Head Gasket

DNJ 1988 Dodge Raider 2.6L Cylinder Head Gasket

$12.99 USD
$20.96 USD $12.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Dodge Raider 2.6LFitment notes & questions

1988 Dodge Raider 2.6L Cylinder Head Gasket by DNJ for 1988 Dodge Raider 2 with the 2.6L engine. The head gasket seals the cylinder head to the block, keeping combustion pressure in the cylinders and coolant and oil in their own passages.

Quick facts

  • Brand: DNJ
  • Part type: Head gasket
  • Listed for: 1988 Dodge Raider 2
  • Engine: 2.6L
  • Engine code: 8V Naturally Aspirated SOHC
  • Part number: HG12_75

Listed fitment

  • [1981-1989] CHRY, MAZDA, MITSUB / L4 / 2.6L / 156 SOHC 8V [(G54B, G54BT)]

Good to know

  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Most head gaskets call for new head bolts and a flat, clean deck surface. Check the head and block before you reassemble.

View full details

DNJ head gasket for the Dodge Raider 2.6L: what to know

A failed head gasket can mix coolant and oil, push coolant out of the system or cause overheating, so it is a job worth doing once and doing right.

Fitment notes

  • Listed for: Dodge Raider 2.6L.
  • Engine: match the engine size and code to your vehicle; the same model often came with several engines.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.

Ask about fitment

What else to plan for

  • Head bolts. Many engines use torque-to-yield head bolts that should not be reused.
  • Coolant. Refill with the coolant type your engine calls for.
  • Valve cover and intake gaskets. They come off during the job, so it is the time to replace them.

More for your car: Dodge Head Gaskets · Dodge Parts · All Head Gaskets · Engine

Questions about Dodge Raider 2.6L head gasket

Will this fit my Dodge Raider 2.6L?
It is listed for the Dodge Raider 2.6L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
What are signs of a bad head gasket?
Common signs are overheating, white exhaust smoke, coolant loss with no visible leak, and milky oil.
Should I resurface the cylinder head?
If the head is warped or the surface is damaged, a machine shop can check and resurface it before the new gasket goes on.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.
More parts for this car
Dodge Head GasketsHead GasketsDodge PartsEngineAll DNJ