DNJ
DNJ 1986 Toyota Pickup 2.4L Exhaust Manifold Gasket
DNJ 1986 Toyota Pickup 2.4L Exhaust Manifold Gasket
Part number: EG912_4
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Toyota Pickup 2.4LFitment notes & questions
DNJ Pickup Exhaust Manifold Gasket for the 1986 Toyota with the 2.4L engine. Gaskets seal the joints between engine parts so oil, coolant and air stay where they belong. Part number: EG912_4.
Key features
- Exhaust position
- Made for 22R-TEC 8V Turbocharged SOHC engines
- Listed for L4 2.4L SOHC 8V engines
Specifications
- Brand: DNJ
- Part type: Gasket
- Part number: EG912_4
- Position: Exhaust
- Engine: 2.4L
- Engine code: 22R-TEC 8V Turbocharged SOHC
Fitment for the 1986 Toyota
- Years: 1985–1988
- Vehicles: Toyota
- Cylinders: L4
- Engine: 2.4L SOHC 8V
- Engine codes: 22RTEC
Check your year, model, engine and trim against this list before you order.
What it does
Replacing a gasket is usually more labor than parts, so it pays to replace any others you disturb on the way in. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Clean both mating surfaces completely and follow the bolt torque and sequence for your engine.
- Sealant where called for: Some joints need a dab of sealant at corners or seams; others must go on dry.
- Bolts and grommets: Rubber grommets and old bolts are worth replacing if they are damaged.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this pickup exhaust manifold gasket?
EG912_4 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 2.4L 22R-TEC 8V Turbocharged SOHC engine in the 1986 Toyota. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the exhaust position. If you are replacing both sides, check whether you need one of each.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (1986 Toyota 2.4L).
- Check the position: this part is listed as exhaust.
- Compare part number EG912_4 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
DNJ gasket for the Toyota Pickup 2.4L: what to know
An old gasket gets hard and shrinks with heat cycles, which is when leaks start. A new gasket restores the seal.
Fitment notes
- Listed for: Toyota Pickup 2.4L.
- Engine: match the engine size and code to your vehicle; the same model often came with several engines.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.
Ask about fitmentWhat else to plan for
- Sealant where called for. Some joints need a dab of sealant at corners or seams; others must go on dry.
- Bolts and grommets. Rubber grommets and old bolts are worth replacing if they are damaged.
More for your car: Toyota Exhaust Manifold Gaskets · Toyota Parts · Engine
Questions about Toyota Pickup 2.4L gasket
Will this fit my Toyota Pickup 2.4L?
Do I need sealant with this gasket?
Can I reuse an old gasket?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.