DNJ
DNJ 1985 Pontiac Grand Prix 5.0L Intake Valve
DNJ 1985 Pontiac Grand Prix 5.0L Intake Valve
Part number: IV3125A_166
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Pontiac Grand PrixFitment notes & questions
DNJ Intake Valve for the 1985 Pontiac Grand Prix with the 5.0L engine. Highlights include nitride Coated and 2 Groove. Intake valves let the air and fuel mixture into the cylinder; exhaust valves let the burned gases out. Part number: IV3125A_166.
Key features
- Nitride Coated
- 2 Groove
- 7mm Head Dia
- 7mm Stem Dia
- 124.8mm O.A.L
Specifications
- Brand: DNJ
- Part type: Valve
- Part number: IV3125A_166
- Position: Intake
- Engine: 5.0L
- Engine code: VIN K 12V Naturally Aspirated OHV
Fitment for the 1985 Pontiac Grand Prix
- Years: 1980–1996
- Vehicles: GM
- Application: Nitride Coated; 2 Groove; 46.7mm Head Dia.; 8.7mm Stem Dia.; 124.8mm O.A.L.
- Cylinders: V6, V8
- Displacement: 3.8L, 5.0L
- Engine: 229, 305 OHV 12V, 16V
- Engine codes: CHEVROLET
Check your year, model, engine and trim against this list before you order.
What it does
Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Have the valve seats cut or lapped so the new valves seal fully.
- Valve stem seals: Always new with new valves.
- Head gasket: The head comes off for this job.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this intake valve?
IV3125A_166 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 5.0L VIN K 12V Naturally Aspirated OHV engine in the 1985 Pontiac Grand Prix. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the intake position. If you are replacing both sides, check whether you need one of each.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (1985 Pontiac Grand Prix 5.0L).
- Check the position: this part is listed as intake.
- Compare part number IV3125A_166 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

DNJ engine valves for the Pontiac Grand Prix: what to know
Burned or bent valves cause misfires and low compression. Guides that wear let valves wobble and burn oil.
Fitment notes
- Listed for: Pontiac Grand Prix.
- Engine: match the engine size and code to your vehicle; the same model often came with several engines.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentWhat else to plan for
- Valve stem seals. Always new with new valves.
- Head gasket. The head comes off for this job.
More for your car: Pontiac Intake Valves · Pontiac Parts · All Intake Valves · Engine
Questions about Pontiac Grand Prix engine valves
Will this fit my Pontiac Grand Prix?
How do I know a valve is bad?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.